首页 | 本学科首页   官方微博 | 高级检索  
     检索      

多路高压放大器输出直流电压监测与显示系统设计
引用本文:阴玉梅,李洪文,姚凯男,王建立.多路高压放大器输出直流电压监测与显示系统设计[J].现代电子技术,2012,35(19):172-174.
作者姓名:阴玉梅  李洪文  姚凯男  王建立
作者单位:1. 中国科学院长春光学精密机械与物理研究所,吉林长春,130033
2. 中国科学院长春光学精密机械与物理研究所,吉林长春130033;中国科学院研究生院,北京100039
基金项目:中科院长春光机所三期创新支持项目
摘    要:在自适应光学系统中,自适应控制器AD输出控制信号需要通过高压放大器放大成高压电驱动压电陶瓷变形镜,从而实现波前实时校正.在实际系统中,往往需要对高压放大器输出电压进行实时监测.本系统采用小体积单片机C8051F310作为控制器,采用专用电表芯片CS5460A作为核心测量芯片,实现了单板对20路0~500 V直流电压的实时监测与显示,线性度优于0.2%.

关 键 词:电压监测  CS5460A  高压放大器  自适应光学

Design of monitoring and displaying system for DC voltage output of multi-channel high voltage amplifier
YIN Yu-mei , LI Hong-wen , YAO Kai-nan , WANG Jian-li.Design of monitoring and displaying system for DC voltage output of multi-channel high voltage amplifier[J].Modern Electronic Technique,2012,35(19):172-174.
Authors:YIN Yu-mei  LI Hong-wen  YAO Kai-nan  WANG Jian-li
Institution:1(1.Changchun Institute of Optics,Fine Mechanics and Physics,Chinese Academy of Sciences,Changchun 130033,China; 2.Graduate University of Chinese Academy of Sciences,Beijing 100039,China)
Abstract:In adaptive optical system,an AD of the adaptive controller outputs control signals that are amplified to drive the DM which is used for compensating the wavefront aberration.In the real system,output votage of high voltage amplifiers is detected in real time.The proposed system takes a small volume MCU C8051F310 as the controller and an ammeter CS5460A as the voltage measurement device.Finally,the real-time monitoring and displaying of 20-channel DC voltage from 0 V to 500 V is achieved and its linearity is better than 0.2%.
Keywords:voltage detection  CS5460A  high voltage amplifier  adaptive optics
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号