首页 | 本学科首页   官方微博 | 高级检索  
     

空心玻璃微珠及玻璃纤维混合填充环氧树脂力学性能实验研究
引用本文:王美芬,余为,刘爽,李慧剑. 空心玻璃微珠及玻璃纤维混合填充环氧树脂力学性能实验研究[J]. 实验力学, 2015, 30(1): 117-123
作者姓名:王美芬  余为  刘爽  李慧剑
作者单位:燕山大学,河北省重型装备与大型结构力学可靠性重点实验室, 秦皇岛 066004;燕山大学,河北省重型装备与大型结构力学可靠性重点实验室, 秦皇岛 066004;燕山大学,河北省重型装备与大型结构力学可靠性重点实验室, 秦皇岛 066004;燕山大学,河北省重型装备与大型结构力学可靠性重点实验室, 秦皇岛 066004
基金项目:河北省自然科学基金青年基金 (A2014203051);河北省高等学校科学技术研究重点项目(ZH2012011)
摘    要:制备了一种空心玻璃微珠质量比、四种玻璃纤维质量比的空心玻璃微珠及玻璃纤维混合填充环氧树脂复合泡沫材料。通过一系列准静态压缩、拉伸实验,研究了玻璃纤维填充量对复合材料的密度、强度、弹性模量等性能的影响,并分析了其影响原因。通过三点弯曲实验,研究了复合材料弯曲弹性模量、弯曲强度等力学性能与玻璃纤维填充量的关系。通过拉伸断口SEM照片分析了玻璃纤维增强复合材料力学性能的原因。研究表明:随着玻璃纤维填充量增加,复合材料的拉伸和弯曲强度、压缩屈服极限及弹性模量等力学性能都有较大的提高,且仍然保持了较好的弹性性能和塑性特征。

关 键 词:空心玻璃微珠  玻璃纤维  环氧树脂  复合泡沫材料  力学性能

Experimental Study of Mechanical Properties of Epoxy Resin Filled with Hollow Glass Microsphere and Glass Fiber Mixture
WANG Mei-fen,YU Wei,LIU Shuang and LI Hui-jian. Experimental Study of Mechanical Properties of Epoxy Resin Filled with Hollow Glass Microsphere and Glass Fiber Mixture[J]. Journal of Experimental Mechanics, 2015, 30(1): 117-123
Authors:WANG Mei-fen  YU Wei  LIU Shuang  LI Hui-jian
Affiliation:Key Laboratory of Mechanical Reliability for Heavy Equipments and Large Structures of Hebei Province, Yanshan University, Qinhuangdao 066004, Hebei, China;Key Laboratory of Mechanical Reliability for Heavy Equipments and Large Structures of Hebei Province, Yanshan University, Qinhuangdao 066004, Hebei, China;Key Laboratory of Mechanical Reliability for Heavy Equipments and Large Structures of Hebei Province, Yanshan University, Qinhuangdao 066004, Hebei, China;Key Laboratory of Mechanical Reliability for Heavy Equipments and Large Structures of Hebei Province, Yanshan University, Qinhuangdao 066004, Hebei, China
Abstract:Fiber-reinforced epoxy resin syntactic foam filled with a kind of hollow glass microsphere mass ratio and four kinds of glass fiber mass ratio was prepared respectively. A series of quasi-static compression and tensile experiments were conducted. The influence of glass fiber filling amount on the density, strength and elastic modulus of syntactic foam was studied and the reasons of the influence were analyzed. The relations among the elastic modulus, bending strength and glass fiber filling amount were obtained through three-point bending experiment. The reasons of syntactic foam mechanical property reinforcement due to glass fiber filling were analyzed through tensile fracture SEM photos. Results show that with the increase of glass fiber mass ratio, all the tensile strength, bending strength, compressive yield limit and compressive elastic modulus are greatly improved. At the same time, it still keeps good elastic performance and plastic characteristics.
Keywords:hollow glass microsphere   glass fiber   Epoxy resin   syntactic foam   mechanical properties
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《实验力学》浏览原始摘要信息
点击此处可从《实验力学》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号