首页 | 本学科首页   官方微博 | 高级检索  
     

改性活性炭负载三聚磷酸二氢铝催化合成苯甲醛乙二醇缩醛
引用本文:黄润均,周家添,谢威,陈东莲,韦冬萍,袁爱群,梁慧. 改性活性炭负载三聚磷酸二氢铝催化合成苯甲醛乙二醇缩醛[J]. 应用化学, 2016, 33(6): 649-654. DOI: 10.11944/j.issn.1000-0518.2016.06.150378
作者姓名:黄润均  周家添  谢威  陈东莲  韦冬萍  袁爱群  梁慧
作者单位:桂林理工大学南宁分校 南宁 530001; 广西民族大学化学化工学院 南宁 530006; 广西工业职业技术学院 南宁 530004
基金项目:2015广西科技开发项目(14125002-6),2014年南宁市科技开发项目(20145201),2013广西教育厅项目(2013YB105,200103YB041),2014广西工业职业技术学院项目
摘    要:采用硝酸改性活性炭后负载三聚磷二氢铝用于催化合成苯甲醛乙二醇缩醛,通过单因素实验考察醇醛摩尔比、催化剂用量及反应时间等因素对产品收率的影响,并采用正交实验获取较佳工艺条件。 结果表明,该催化反应中,当反应温度为110 ℃时,各因素对收率的影响顺序为:醇醛比>反应时间>带水剂加入量>催化剂用量。 优化反应条件为:苯甲醛0.2 mol,醇醛摩尔比2.5,反应时间75 min,催化剂加入量4%(占反应物总质量),带水剂加入量25 mL,苯甲醛乙二醇缩醛收率86.5%,催化剂经5次重复使用后收率仍大于86.0%。

关 键 词:三聚磷酸二氢铝  苯甲醛乙二醇缩醛  活性炭  催化  
收稿时间:2015-10-27

Synthesis of Benzaldehyde Glycol Acetal Catalyzed by Aluminum Dihydrogen Tripolyphosphate Supported on Modified Activated Carbon
HUANG Runjun,ZHOU Jiatian,XIE wei,CHEN donglian,WEI dongping,YUAN Aiqun,LIANG Hui. Synthesis of Benzaldehyde Glycol Acetal Catalyzed by Aluminum Dihydrogen Tripolyphosphate Supported on Modified Activated Carbon[J]. Chinese Journal of Applied Chemistry, 2016, 33(6): 649-654. DOI: 10.11944/j.issn.1000-0518.2016.06.150378
Authors:HUANG Runjun  ZHOU Jiatian  XIE wei  CHEN donglian  WEI dongping  YUAN Aiqun  LIANG Hui
Affiliation:Guilin University of Technology at Nanning,Nanning 530001,China; College of Chemistry and Chemical Engineering,Guangxi University for Nationalities,Nanning 530006,China; Guangxi Vocational & Technical Institute of Industry,Nanning 530004,China
Abstract:Benzaldehyde glycol acetal was synthesized by aluminum dihydrogen tripolyphosphate supported on nitric acid modified activated carbon. The effect of the molar ratio of alcohol to aldehyde, catalyst amount and reaction time on the yield were studied by single-factor experiments. Orthogonal design was used to obtain the optimized conditions for the synthesis of benzaldehyde glycol acetal. The results show that the three main influencing factors are in the order as follows: the molar ratio of alcohol to aldehyde>the reaction time>the quantity of water carrying agent>the quantity of catalyst. The optimal technical conditions are:temperature 110 ℃, benzaldehyde 0.2 mol, the molar ratio of alcohol to aldehyde is 2.5, reaction time 75 min, the quantity of catalyst 4%, water-carrying agent of cyclohexane 25 mL. Under these conditions, the yield of benzaldehyde glycol acetal is above 86.5%. The catalyst can be recycled for multiple uses and the acetal yield is 86.0% after five cycles.
Keywords:aluminum dihydrogen tripolyphosphate  benzaldehyde glycol acetal  activated carbon  catalysis
本文献已被 CNKI 等数据库收录!
点击此处可从《应用化学》浏览原始摘要信息
点击此处可从《应用化学》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号