首页 | 本学科首页   官方微博 | 高级检索  
     


Monitoring surface breaking defects with piezoelectric active systems
Authors:S. R. K. Morikawa D.Sc.  A. L. Gama D.Sc.  A. M. B. Braga Ph.D.  R. R. Correia M.Sc.
Affiliation:1. Department of Mechanical Engineering, Pontifícia Universidade Católica do Rio de Janeiro PUC-Rio, 22453-900, Rio de Janeiro, RJ, Brazil
2. Department of Mechanical Engineering, Universidade Federal Fluminense-UFF, 24210-000, Niterói, RJ, Brazil
3. Structural Engineering Department, Empresa Brasileira de Aeronáutica S.A.-EMBRAER 12227-901, S?o losé dos Campos, SP, Brazil
Abstract:This paper is concerned with an experimental study and a numerical study of the application of two active techniques to monitor the growth of fatigue cracks and simulated defects in beams using piezoelectric sensors and actuators. The first technique is a transfer function method that consists of exciting the structure with piezoelectric actuators, while recording the electromechanical response of sensors placed close to the defect. Results have shown that the choice of adequate parameters, such as sensor size and its distance to the defect edge, allows the detection of small changes in defect depth. Finite-element simulations were also performed to determine a correlation between sensor response and defect depth. The second method is an impedance technique where a single piezoelectric element is used to excite and to monitor the growth of the defect. This technique was evaluated through experiments where a machined slot of increasing depth was monitored by measuring the electrical admittance of the piezoelectric sensor.
Keywords:Structural health monitoring  piezoelectric sensors and actuators  surface breaking defects
本文献已被 SpringerLink 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号