1. Centre for Sustainable Energy Systems, Australian National University, , ACT 0200 Australia;2. Department of Electronic Materials Engineering, Research School of Physics and Engineering, , ACT 0200 Australia
Abstract:
The selection of either an oxidising or inert ambient during high temperature annealing is shown to affect dopant activation and electron–hole recombination in boron implanted silicon samples. Samples implanted with B at fluence between 3 × 1014 cm–2 to 3 × 1015 cm–2 are shown to have lower dopant activation after oxidation at 1000 °C compared to an equivalent anneal in an inert ambient. In addition, emitter recombination is shown to be up to 15 times higher after oxidation compared with an inert anneal for samples with equivalent passivation from deposited Al2O3 films. The observed increase in recombination for oxidised samples is attributed to the enhanced formation of boron‐interstitial defect clusters and dislocation loops under oxidising conditions. It is also shown that an inert anneal for 10 minutes at 1000 °C prior to oxidation has no significant impact on sheet resistance or recombination compared with a standard oxidation process.
