| Abstract: | The production and transportation of fluorescent light produced in wavelength-shifting fibers (WSFs) coupled to YAP scintillation crystal is simulated using the GEANT4 codes.An advantage of the wavelength-shifting fiber readout technique over a direct readout with a position-sensitive photo-sensor is the reduced requirement for position sensitive photomultiplier tube photocathode area.With this gamma-ray detector,the gamma camera is small and flexible and has larger effective field of view and low cost.Simulation results show that a) a mean 12 of photons per 59.5 keV gamma ray interaction is produced in the WSF located nearest to the incident gamma ray,and a spatial resolution of 3.6 mm FWHM is obtained,b)a mean 27 of photons per 140 keV gamma ray interaction is produced and a spatial resolution of 3.1 mm FWHM is obtained.Results demonstrate the feasibility of this concept of a compact gamma-ray detector based on wavelength-shifting fibers readout.However,since the very low photoelectron levels,it is very important to use a photon counting device with good single photo-electron response to readout the WSFs. |
