| 配注过程中聚合物溶液的黏度损失分析 |
| |
| 引用本文： | 陈明强,孙志强,王江顺,万玲侠.配注过程中聚合物溶液的黏度损失分析[J].西安石油大学学报(自然科学版),2007,22(3):60-63. |
| |
| 作者姓名： | 陈明强 孙志强 王江顺 万玲侠 |
| |
| 作者单位： | 西安石油大学,石油工程学院,陕西,西安,710065 |
| |
| 摘 要： | 在聚合物驱油中黏度是驱油效率的关键参数,而要控制配注过程中聚合物溶液黏度损失,必须从配注工艺的优化入手.通过理论分析与现场试验相结合的方法,发现常规的配注工艺过程中,在过滤器、注聚泵、静混器、炮眼等主要环节的黏度损失总和高达50%~60%.而根据实际聚合物驱油配注条件与环境情况,通过合理选择设备与参数进行配注工艺过程优化,可使聚合物溶液总黏度损失减少8%~16%.
|
| 关 键 词： | 聚合物驱 配注工艺 黏度损失 降解 |
| 文章编号： | 1673-064X（2007）03-0060-04 |
| 修稿时间： | 2006-12-20 |
Analysis of the viscosity loss of polymer solution in the process of injection allocation |
| |
| CHEN Ming-qiang,SUN Zhi-qiang,WANG Jiang-shun,WAN Ling-xia.Analysis of the viscosity loss of polymer solution in the process of injection allocation[J].Journal of Xian Shiyou University,2007,22(3):60-63. |
| |
| Authors: | CHEN Ming-qiang SUN Zhi-qiang WANG Jiang-shun WAN Ling-xia |
| |
| Abstract: | The viscosity of polymer solution is a key parameter of the polymer flood.It graduately reduces in the process of injection allocation.According to theoretical analysis and field tests,it is found that the viscosity loss produces mainly in filters,polymer injecting pumps,static mixers and shot holes.Sum of the polymer viscosity losses there accounts for 50%～60% of total loss.Through the optimization of injection allocation parameters and the rationally selection of injection allocation equipment,the viscosity loss will is decreased by 8%～16%. |
| |
| Keywords: | polymer flooding injection allocation technology viscosity loss degradation |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
