Influence of ion pairing on the oxidation of iodide by MLCT excited states

The oxidation of iodide to diiodide, I(2)˙(-), by the metal-to-ligand charge-transfer (MLCT) excited state of Ru(deeb)(3)](2+), where deeb is 4,4'-(CO(2)CH(2)CH(3))(2)-2,2'-bipyridine, was quantified in acetonitrile and dichloromethane solution at room temperature. The redox and excited state properties of Ru(deeb)(3)](2+) were similar in the two solvents; however, the mechanisms for excited state quenching by iodide were found to differ significantly. In acetonitrile, reaction of Ru(deeb)(3)](2+*) and iodide was dynamic (lifetime quenching) with kinetics that followed the Stern-Volmer model (K(D) = 1.0 ± 0.01 × 10(5) M(-1), k(q) = 4.8 × 10(10) M(-1) s(-1)). Excited state reactivity was observed to be the result of reductive quenching that yielded the reduced ruthenium compound, Ru(deeb(-))(deeb)(2)](+), and the iodine atom, I˙. In dichloromethane, excited state quenching was primarily static (photoluminescence amplitude quenching) and Ru(deeb(-))(deeb)(2)](+) formed within 10 ns, consistent with the formation of ion pairs in the ground state that react rapidly upon visible light absorption. In both solvents the appearance of I(2)˙(-) could be time resolved. In acetonitrile, the rate constant for I(2)˙(-) growth, 2.2 ± 0.2 × 10(10) M(-1) s(-1), was found to be about a factor of two slower than the formation of Ru(deeb(-))(deeb)(2)](+), indicating it was a secondary photoproduct. The delayed appearance of I(2)˙(-) was attributed to the reaction of iodine atoms with iodide. In dichloromethane, the growth of I(2)˙(-), 1.3 ± 0.4 × 10(10) M(-1) s(-1), was similar to that in acetonitrile, yet resulted from iodine atoms formed within the laser pulse. These results are discussed within the context of solar energy conversion by dye-sensitized solar cells and storage via chemical bond formation.