Direct conversion of solid hydrocarbons in a molten carbonate fuel cell

Electrical characteristics of a molten carbonate fuel cell allowing direct electrochemical oxidation of dispersed hydrocarbons have been examined. As the fuel, graphite, anthracite, and cannel coal samples were used. Data illustrating the effect of electrolyte temperature, fuel type and dispersion, and also reactant gas mixture composition on the performance characteristics of the fuel cell, were obtained. Correlation between the specific characteristics of the fuel cell and the hydrogen content of fuel material was established. The maximum current-density values were achieved with hydrogen-rich cannel coal. For dispersed fuel samples, interparticle contact losses were found to have influence on the cell-generated voltage. The maximum cell opencircuit voltage was reached with stoichiometric oxygen-carbon dioxide mixture blown into the cathode. Yet, the largest current-density values were obtained when carbon dioxide lean mixtures were used. Even at zero carbon dioxide concentration the range of cathode polarizations was less than that observed with stoichiometric mixture. The processes proceeding in the cathode and anode packs of the fuel cell are believed to be interrelated processes. In a model fuel cell fueled with dispersed coal, current densities up to 140 mA/cm² and specific powers up to 70 mW/cm² were achieved.