注塑模保压过程的数值分析 |
| |
引用本文: | 刘春太,陈静波,申长雨,董斌斌.注塑模保压过程的数值分析[J].力学与实践,2002,24(3):0-0. |
| |
作者姓名: | 刘春太 陈静波 申长雨 董斌斌 |
| |
作者单位: | 郑州大学工学院橡塑模具国家工程研究中心,郑州,450002 |
| |
基金项目: | 国家自然科学基金重点项目(19632040),河南省自然科学基金项目(004060300)资助. |
| |
摘 要: | 基于对注塑成型保压过程的机理研究,本文利用黏性、可压缩非
牛顿流体基本方程,得到了注塑模保压过程分析的控制方程,采用数值
方法实现了对保压过程的数值模拟,并通过实例说明如何利用数值模拟
为优化注塑模成型加工提供科学的理论根据.
|
关 键 词: | 注塑成型 保压过程 数值分析 |
修稿时间: | 2001年2月7日 |
NUMERICAL ANALYSIS OF PACKING PROCESS IN INJECTION-MOLDING |
| |
Abstract: | Based on engineering knowledge of pack-ing process in injection-molding, the equations gov-erning the packing process are obtained using thebasic equations of Non-Newtonian, compressible,viscous fluid. Numerical methods are used to modelthis process, and a practical example is used toexplain how to use these results to optimize theinjection-molding. |
| |
Keywords: | injection-molding packing process nu-merical analysis |
本文献已被 维普 万方数据 等数据库收录! |
| 点击此处可从《力学与实践》浏览原始摘要信息 |
| 点击此处可从《力学与实践》下载免费的PDF全文 |
|