| 用于形状记忆材料研究的中子衍射原位温度加载系统 |
| |
| 引用本文： | 庞蓓蓓,张莹,王虹,席治国,张洁.用于形状记忆材料研究的中子衍射原位温度加载系统[J].强激光与粒子束,2014,26(10):104005. |
| |
| 作者姓名： | 庞蓓蓓 张莹 王虹 席治国 张洁 |
| |
| 作者单位： | 1.中国工程物理研究院 核物理与化学研究所, 四川 绵阳 621 900; |
| |
| 基金项目： | 国家自然科学基金重点项目(51231002) |
| |
| 摘 要： | 配合中国工程物理研究院的中子衍射应力谱仪开展形状记忆材料的相关研究,设计了一套原位温度加载系统。该系统可为测量样品提供25~800℃温度环境,温度控制器采用大林改进算法,有效地消除了温度过冲问题。该系统已开展了多次带束测试,结果表明其结构设计适用于中子衍射实验,温度控制在上升阶段无超调、稳态误差为±1℃,满足形状记忆材料的温度加载实验要求。
|
| 关 键 词： | 形状记忆材料 中子衍射 原位加载 温度控制 温度过冲 |
| 收稿时间： | 2014-05-26 |
Neutron diffractometer in-situ temperature loading system for shape memory materials study |
| |
| Institution: | 1.Institute of Nuclear Physics and Chemistry,CAEP,P.O.Box 919-218,Mianyang 621900,China;2.Key Laboratory of Neutron Physics,CAEP,P.O.Box 919-218,Mianyang 621900,China |
| |
| Abstract: | An in-situ temperature loading system was designed. It can control the samples temperature from 25 ℃ to 800 ℃, and the temperature controller applied improved Dahlin algorithm to inhibit temperature overshoot. The system was tested with neutron beam on the residual stress neutron diffractometer. The result shows that the structure suits for neutron diffraction experiment, and the temperature keeps not higher than the target during the ascending period, and the precision is 1 ℃ during the stable period, which meets temperature loading requirements for shape memory materials. |
| |
| Keywords: | |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《强激光与粒子束》浏览原始摘要信息 |
| 点击此处可从《强激光与粒子束》下载免费的PDF全文 |
|
