Optimization of solid phase dispersive field‐assisted ultrasonication for the extraction of auramine O and crystal violet dyes using central composite design

Simultaneous preconcentration and determination of auramine o (AO) and crystal violet (CV) dyes from aqueous solution was conducted by ultrasound assisted (dispersive) solid phase microextraction (UASPME) based on SnO₂/SnS composite loaded activated carbon (SnO₂/SnS‐NCs‐AC). The prepared of SnO₂/SnS‐NCs‐AC was characterized by FESEM and XRD analysis. Main and interaction influences of operational parameters such as pH, sonication time, amounts of sorbent, and type of eluent on extraction efficiency were investigated by central composite design and optimized with desirability function approach (DFA). ANOVA was conducted and shows that optimized values were found at 15.33 min sonication time, 0.019 g SnO₂/SnS‐NCs‐AC mass, pH 5.46 and among different solvents, dimethyl formamide was selected as an efficient eluent. Under this conditions recoverees percentage were obtained 82.85% and 86.70% for AO and CV, respectively. Based on F‐test under ANOVA all main effect and interaction effect of understudy parameters has the significant effect on the responses. At optimum conditions, limit of detection (0.0015 and 0.001 mg/l), limit of quantitation (0.4 and 0.4 mg/l), limit of linearity (9.0 and 9.0 mg/l), enrichment factor (33.48 and 83.71) and percent relative standard deviation (3.44 and 4.20) were found to be for auramine o and crystal violet dyes, respectively. Finally, the method was successfully applied for the preconcentration and determination of AO and CV in water samples and ER% of 89.0‐97.0 and 96.2–98.0% as acceptable range were found to be for AO and CV samples, respectively.