| Abstract: | Epoxy–amine networks are known to be homogeneous. However, using new analysis tools that allow the observation scale to be reduced to a nanometric level, some authors have stated the opposite. In this work, the network morphology has been studied with atomic force microscopy in the tapping mode as a function of the hardener nature and the stoichiometry of the reactive blend. A very homogeneous epoxy network topography, similar to that of an amorphous thermoplastic, has been obtained. For comparison, a truly heterogeneous network topography, like that of unsaturated thermosets cured by free‐radical mechanisms, has been imaged. For the observation of surfaces on a scale smaller than a nanometer, caution must be taken:(1) the tips must be freshly cleaned so that distortion on the image is prevented and (2) the surfaces must be very flat so that the phase contrast is not influenced significantly by differences in the sample topography. This works gives guidelines on using atomic force microscopy in the tapping mode for epoxy–amine network characterization and discusses epoxy–amine network homogeneity. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 2422–2432, 2003 |
