Cysteine functionalized poly(hydroxyethyl methacrylate) monolith for heavy metal removal

The aim of this study was to investigate the performance of monoliths composed of hydroxyethyl methacrylate (HEMA) to which N-methacryloyl-(L)-cysteine methyl ester (MAC) was polymerized for removal of heavy metal ions. Poly(HEMA-MAC) monolith was produced by bulk polymerization. Poly(HEMA-MAC) monolith was characterized by FTIR and scanning electron microscopy (SEM). The poly(HEMA-MAC) monolith with a swelling ratio of 89%, and containing 69.4 μmol MAC/g were used in the adsorption studies. Adsorption capacity of the monolith for the metal ions, i.e., Cu²⁺, Cd²⁺, Zn²⁺, Hg²⁺, and Pb²⁺ were investigated in aqueous media containing different amounts of the ions (10–750 mg/L) and at different pH values (3.0–7.0). The maximum adsorption capacities of the poly(HEMA-MAC) monolith were 68.2 mg/g for Zn²⁺, 129.2 mg/g for Cu²⁺, 245.8 mg/g for Pb²⁺, 270.2 mg/g for Hg²⁺, and 284.0 mg/g for Cd²⁺. pH significantly affected the adsorption capacity of MAC incorporated monolith. The competitive adsorption capacities were 587 μmol/g for Zn²⁺, 1646 μmol/g for Cu²⁺, 687 μmol/g for Pb²⁺, 929 μmol/g for Hg²⁺, and 1993 μmol/g for Cd²⁺. The chelating monolith exhibited the following metal ion affinity sequence on molar basis: Cd²⁺ > Cu²⁺ > Hg²⁺ > Pb²⁺ > Zn²⁺. The formation constants of MAC–metal ion complexes have been investigated applying the method of Ruzic. The calculated values of stability constants were 5.28 × 10⁴ L/mol for Cd²⁺, 4.16 × 10⁴ L/mol for Cu²⁺, 2.27 × 10⁴ L/mol for Hg²⁺, 1.98 × 10⁴ L/mol for Pb²⁺, and 1.25 × 10⁴ L/mol for Zn²⁺. Stability constants were increased with increasing binding affinity. The chelating monoliths can be easily regenerated by 0.1 M HNO₃ with higher effectiveness. These features make poly(HEMA-MAC) monolith a potential adsorbent for heavy metal removal.