| 430不锈钢热浸镀铝(硅)之铝化层成长研究 |
| |
| 引用本文： | 陈鹏交,王朝正,林裕章,金萱.430不锈钢热浸镀铝(硅)之铝化层成长研究[J].电化学,2005,11(3):271-276. |
| |
| 作者姓名： | 陈鹏交 王朝正 林裕章 金萱 |
| |
| 作者单位： | 台湾科技大学机械工程研究所,台湾科技大学机械工程研究所,台湾科技大学机械工程研究所,东南技术学院机械工程系 台北台湾
,台北台湾
,台北台湾
,台北台湾 |
| |
| 基金项目： | 感谢科学委员会补助经费（NSC-92-2216-E-011-026）使本研究得以顺利完成. |
| |
| 摘 要： | 使用430不锈钢于680至800℃下作熔融铝硅合金热浸处理,研究热浸温度及热浸时间对铝硅合金化层成长的影响及铝化层之成长动力学.结果表明,430不锈钢在680~800℃经热浸16~289 s后,表面镀层与铝化层之生成厚度随热浸时间及热浸温度而增加,铝化层之成长动力学符合抛物线定律,并因相互扩散而形成FeA l3及Fe2A l5相,金相截面观察显示,680℃热浸处理的合金化层界面平坦,而在800℃下的即趋于不规则.
|
| 关 键 词： | 热浸镀铝硅 热浸镀铝 430不锈钢 |
| 文章编号： | 1006-3471（2005）03-0271-06 |
| 收稿时间： | 2005-03-18 |
| 修稿时间： | 2005年3月18日 |
The Growth of Aluminide-layer during the Hot-dipping Al-(Si ) Coating onto 430 Stainless Steels |
| |
| CHEN Peng-chicao,WANG Chaur-jeng,LIN Yu-chang,CHING Hsuan.The Growth of Aluminide-layer during the Hot-dipping Al-(Si ) Coating onto 430 Stainless Steels[J].Electrochemistry,2005,11(3):271-276. |
| |
| Authors: | CHEN Peng-chicao WANG Chaur-jeng LIN Yu-chang CHING Hsuan |
| |
| Abstract: | The 430 stainless steels have been hot dipped in the molten Al-6.5%Si melts from 680 to 800℃, respectively. The effects of the hot dipping temperature and time on the thickness of the internal alloy layer have been investigated. The activation energy of the growth kinetic of aluminized layer was also calculated. The results showed that the thickness of aluminized layer increased with increasing dipping time and temperature. Besides, the growth kinetic of aluminized layer obeys parabolic rate law. The FeAl_(3 )and Fe_(2)Al_(5 )were formed by the inward diffusion, and the interface of intermetallic layer will be rugged and rough at the 800℃ more than 680℃. |
| |
| Keywords: | Hot-dip aluminum-silicon Hot-dip pure aluminum 430 stainless steel Aluminide layer |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
| 点击此处可从《电化学》浏览原始摘要信息 |
| 点击此处可从《电化学》下载免费的PDF全文 |
|
