首页 | 本学科首页   官方微博 | 高级检索  
     

基于游标效应的双芯光子晶体光纤温度传感器
引用本文:安国文,王立志,贾平岗,翟成瑞,张彦军,苏建慧,朱枫彤,刘磊. 基于游标效应的双芯光子晶体光纤温度传感器[J]. 应用光学, 2022, 43(3): 551-556. DOI: 10.5768/JAO202243.0308002
作者姓名:安国文  王立志  贾平岗  翟成瑞  张彦军  苏建慧  朱枫彤  刘磊
作者单位:中北大学 省部共建动态测试技术国家重点实验室,山西 太原 030051
基金项目:国家自然科学基金(62075199,51935011,51821003);山西省“1331工程”重点学科建设基金 ;山西省青年科学基金资助项目(201901D211231,201901D211245);山西省高校科技创新项目(2019L0502)
摘    要:设计了一种基于双芯光纤耦合效应和游标效应的高灵敏度温度传感器,传感器是由2个相差一定长度的双芯光子晶体光纤和单模光纤级联构成。双芯光子晶体光纤通过级联实现游标效应,同时对纤芯中间的气孔填充乙醇实现温度传感。仿真结果表明,该温度传感器在35℃~45℃范围内的平均温度灵敏度可达-20.37 nm/℃。与单纯依靠双芯光子晶体光纤能量耦合效应的传感器相比,该传感器的温度检测灵敏度提高了10倍。

关 键 词:双芯光子晶体光纤  耦合模式理论  游标效应  光纤温度传感器
收稿时间:2021-10-26

Dual-core photonic crystal fiber temperature sensor based on vernier effect
Affiliation:State Key Laboratory of Dynamic Testing Technology, North University of China, Taiyuan 030051, China
Abstract:A high-sensitivity temperature sensor based on dual-core fiber coupling effect and vernier effect was proposed. The sensor was composed of two fibers which with a certain length difference, they were dual-core photonic crystal fiber and single mode fiber. The vernier effect was achieved by dual-core photonic crystal fiber through the cascade, and in the meantime the temperature sensing was achieved by filling the pores with ethanol in the middle of the fiber core. The simulation results show that the average temperature sensitivity of -20.37 nm/℃ of the temperature sensor can be achieved in the temperature range of 35℃~45℃. Compared with the sensor which only depends on the energy coupling effect of dual-core photonic crystal fiber, the temperature detection sensitivity of the proposed sensor is 10 times higher.
Keywords:
点击此处可从《应用光学》浏览原始摘要信息
点击此处可从《应用光学》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号