Design of 20 mm~200 mm zoom objective lens for polarization imaging system北大核心CSCD

The zoom objective lens is an important part of the polarization imaging system. At present, the zoom objective lens on the market is relatively expensive due to the use of more aspheric surfaces. In order to reduce the processing cost of the polarization imaging system zoom objective lens, a 20 mm~200 mm zoom objective lens for polarization imaging system was designed. By using positive group compensation method and Zemax to optimize the zoom system, the final system used only 7 spherical lenses to achieve good image quality. The modulation transfer function (MTF) is greater than 0.3 at 120 lp/mm, the distortion is less than 4%, and the cam curve of the system is smooth without breakpoints. The system tolerance analysis results show that the tolerance range is set as follows: the aperture tolerance of the lens surface is 2, the thickness tolerance of the lens or air center is ±0.02 mm, the inclination tolerance of the lens surface center is ±0.025°, the lens assembly and adjustment tolerance is ± 0.025 mm, and the lens refractive index deviation is 0.002. The tolerance setting conforms to the component processing and system assembly and adjustment process, which has a certain reference value to reduce the cost of polarization imaging system. © 2022 Editorial office of Journal of Applied Optics. All rights reserved.

Design of 20 mm~200 mm zoom objective lens for polarization imaging system

The zoom objective lens is an important part of the polarization imaging system. At present, the zoom objective lens on the market is relatively expensive due to the use of more aspheric surfaces. In order to reduce the processing cost of the polarization imaging system zoom objective lens, a 20 mm~200 mm zoom objective lens for polarization imaging system was designed. By using positive group compensation method and Zemax to optimize the zoom system, the final system used only 7 spherical lenses to achieve good image quality. The modulation transfer function (MTF) is greater than 0.3 at 120 lp/mm, the distortion is less than 4%, and the cam curve of the system is smooth without breakpoints. The system tolerance analysis results show that the tolerance range is set as follows: the aperture tolerance of the lens surface is 2, the thickness tolerance of the lens or air center is ±0.02 mm, the inclination tolerance of the lens surface center is ±0.025°, the lens assembly and adjustment tolerance is ± 0.025 mm, and the lens refractive index deviation is 0.002. The tolerance setting conforms to the component processing and system assembly and adjustment process, which has a certain reference value to reduce the cost of polarization imaging system.