首页 | 本学科首页   官方微博 | 高级检索  
     检索      

基于Blumlein 脉冲形成网络的直线变压器驱动源设计
引用本文:李名加,康强,谭杰,辛佳祺,向飞,王淦平.基于Blumlein 脉冲形成网络的直线变压器驱动源设计[J].强激光与粒子束,2011,23(1).
作者姓名:李名加  康强  谭杰  辛佳祺  向飞  王淦平
作者单位:1. 中国工程物理研究院 应用电子学研究所, 四川 绵阳 621900;2. 中国工程物理研究院 研究生部, 北京 100088
基金项目:国家高技术发展计划项目
摘    要: 设计了基于Blumlein 脉冲形成网络的直线变压器驱动源单元模块。双路阻抗各为20 Ω的Blumlein 脉冲形成网络对称连接于直线变压器驱动源(LTD)的初级绕组上,此种接法降低了脉冲形成网络(PFN)的设计难度,有利于形成更好的脉冲。在LTD次级绕组所接的10 Ω匹配负载上输出高压脉冲,实验结果表明,单个LTD模块输出脉冲半高宽约200 ns,前沿约为55 ns,平顶约为100 ns。

关 键 词:脉冲形成网络  直线变压器驱动源  双路  脉冲
收稿时间:1900-01-01;

Design of linear transformer driver based on Blumlein pulse forming network
Li Mingjia,Kang Qiang,Tan Jie,Xin Jiaqi,Xiang Fei,Wang Ganping.Design of linear transformer driver based on Blumlein pulse forming network[J].High Power Laser and Particle Beams,2011,23(1).
Authors:Li Mingjia  Kang Qiang  Tan Jie  Xin Jiaqi  Xiang Fei  Wang Ganping
Institution:1. Institute of Applied Electronics, CAEP, P. O. Box 919-1015, Mianyang 621900, China;2. Graduate School of China Academy of Engineering Physics,Beijing 100088, China
Abstract:A cell module of linear transformer driver (LTD), based on Blumlein pulse forming network (PFN), is designed. Two Blumlein PFNs with 20 Ω resistance are symmetrically connected with the LTD’s primary coil. The connection reduces the design difficulty of PFN and improves the output pulse quality. High voltage pulses are derived from a 10 Ω matching load connected with the LTD’s secondary coil. The output pulse of the LTD module is about 200 ns in duration with a rise time of about 55 ns and a flat top of about 100 ns.
Keywords:linear transformer driver  double  pulse
本文献已被 万方数据 等数据库收录!
点击此处可从《强激光与粒子束》浏览原始摘要信息
点击此处可从《强激光与粒子束》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号