Activation analysis with standards containing two or more active nuclides A computerized method of calculation involving decay and gamma spectral resolution

The resolution of the gamma spectra of activities induced in materials by fast neutron, charged particle and gamma photon activation is complicated by the fact that many elements produce more than one active nuclide in significant amounts. Direct resolution by least-squares fitting of the spectra of standards is only possible in these circumstances if the standard and sample spectra are obtained at the same time after irradiation, as the shapes of the standard spectra change with time. An alternative to the practical collection of spectra in this way is the correction of the standard spectra to the mid-time of counting of a sample spectrum. This may be achieved by recording spectra for a standard at different times and resolving the decay curves obtained for each channel on the basis of the half-lives of the component nuclides, which may be decay-independent or related or both. From the component nuclide count-rates in each channel at some arbitrary time, the standard spectrum at the time of counting of the sample can be generated and then used in a conventional least squares-fit of the sample spectrum. A FORTRAN IV program has been written to carry out this type of calculation on an IBM 360 65 computer. The feasibility of using this method is demonstrated by its application to activation analyses involving standards containing decay-related and independent nuclides.