Electrochemistry of conductive polymers 37. Nanoscale monitoring of electrical properties during electrochemical growth of polypyrrole and its aging

Electrical and morphological properties of polypyrrole (PPy) films were studied during and after their electrochemical growth under various experimental conditions on a nanometer scale using a current-sensing atomic force microscope (CS-AFM). Of acetonitrile (ACN) solutions containing various amounts of water, one that contained 1.0% water produced the best quality films in their electrical and morphological properties in terms of homogeneities. The degree of doping, as well as time evolution of the film structure and its conductivity, of the PPy films was investigated during their growth in water and ACN with 1.0% water by obtaining the current images at a few designated growing stages, and the results were compared. Well-doped, conductive films were obtained from the very early stage during the electrodeposition of PPy in the ACN solution, while the films were poorly doped in water. As the film deposition progressed further in both aqueous and nonaqueous media, the doped areas spread over the whole surface leading to a more homogeneously conducting film. The current-voltage traces were obtained at each growing stage, which showed that the conductivity increases in both media as the PPy grows; the conductivity of the film grown in ACN is much higher than that of the film grown in water at all growing stages. The electrical properties of the PPy film deteriorated gradually upon exposure to air.