首页 | 本学科首页   官方微博 | 高级检索  
     

TiO2/CNTs复合材料涂覆隔膜的制备及在锂硫电池中的应用
引用本文:官亦标,李万隆,谢潇怡,曲薇,沈进冉,傅凯,郭翠静,周淑琴,范红家,褚永金,陈人杰. TiO2/CNTs复合材料涂覆隔膜的制备及在锂硫电池中的应用[J]. 高等学校化学学报, 2019, 40(3): 536. DOI: 10.7503/cjcu20180514
作者姓名:官亦标  李万隆  谢潇怡  曲薇  沈进冉  傅凯  郭翠静  周淑琴  范红家  褚永金  陈人杰
作者单位:新能源与储能运行控制国家重点实验室,北京100192;中国电力科学研究院有限公司,北京100192;环境科学与工程北京市重点实验室,北京理工大学材料科学与工程学院,北京100081;中国电力科学研究院有限公司,北京,100192;环境科学与工程北京市重点实验室,北京理工大学材料科学与工程学院,北京100081;北京电动车辆协同创新中心,北京100081
基金项目:成果转化项目和北京市重点研发计划项目(批准号: Z181100004518001)资助.
摘    要:以金属有机框架材料MIL-125(Ti)为模板制备了多孔TiO2, 同时引入碳纳米管, 得到碳纳米管交联包覆多孔TiO2的三维导电复合材料. 将该复合材料涂覆在隔膜表面并应用于锂硫电池. 利用透射电子显微镜(TEM)、 扫描电子显微镜(SEM)和X射线光电子能谱仪(XPS)等对材料的结构和组成进行了表征. 电化学测试结果表明,在0.5C(1C=1675 mA/g)倍率下, CNTs/S复合正极材料表现出高达1051.1 mA·h/g的放电容量, 循环150周后仍可保持在904.8 mA·h/g. 在1C倍率下, 放电容量最高可达1036.9 mA·h/g, 循环250周后仍有763.0 mA·h/g, 展现出了良好的倍率性能和循环稳定性.

关 键 词:锂硫电池  金属有机框架  化学吸附
收稿时间:2019-07-20

Preparation of TiO2/CNTs Composite Coated Separator and Its Application in Li-S Battery†
GUAN Yibiao,LI Wanlong,XIE Xiaoyi,QU Wei,SHEN Jinran,FU Kai,GUO Cuijing,ZHOU Shuqin,FAN Hongjia,CHU Yongjin,CHEN Renjie. Preparation of TiO2/CNTs Composite Coated Separator and Its Application in Li-S Battery†[J]. Chemical Research In Chinese Universities, 2019, 40(3): 536. DOI: 10.7503/cjcu20180514
Authors:GUAN Yibiao  LI Wanlong  XIE Xiaoyi  QU Wei  SHEN Jinran  FU Kai  GUO Cuijing  ZHOU Shuqin  FAN Hongjia  CHU Yongjin  CHEN Renjie
Affiliation:1. State Key Laboratory of Operation and Control of Renewable Energy & Storage Systems, Beijing 100192, China;2. China Electric Power Research Institute, Beijing 100192, China3. Beijing Key Laboratory of Environmental Science and Engineering, School of Materials Science & Engineering, Beijing Institute of Technology, Beijing 100081, China;4. Collaborative Innovation Center of Electric Vehicles in Beijing, Beijing 100081, China
Abstract:Porous TiO2 was prepared with metal-organic framework MIL-125(Ti) as template, and CNTs were introduced to form the three-dimensional conductive TiO2/CNTs composite. The TiO2/CNTs composite was coated on one side of the separator and applied in lithium-sulfur battery. The morphology and elemental composition of TiO2 were characterized by transmission electron microscopy(TEM), scanning electron microscopy(SEM) and X-ray photoelectron spectroscopy(XPS). The CNTs/S cathodes with TiO2/CNTs composite coated separator deliver a high initial discharge capacity of 1051.1 mA·h/g and still retain a capacity of 904.8 mA·h/g after 150 cycles at 0.5C. Even at 1C, the capacity is still up to 1036.9 mA·h/g, and a high capacity of 763.0 mA·h/g is retained after 250 cycles, showing good rate performance.
Keywords:Li-S battery  Metal-organic framework  Chemical adsorption  
本文献已被 万方数据 等数据库收录!
点击此处可从《高等学校化学学报》浏览原始摘要信息
点击此处可从《高等学校化学学报》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号