Optical properties of white organic light-emitting devices fabricated with three primary-color emitters by using organic molecular-beam deposition

White organic light-emitting devices (WOLEDs) with Mg:Ag/Alq₃/Alq₃:DCJTB/Alq₃/DPVBi/α-NPD/ITO and Mg:Ag/Alq₃/DPVBi:DCJTB/Alq₃/DPVBi/α-NPD/ITO structures were fabricated with three primary-color emitters of red, green, and blue by using organic molecular-beam deposition. Electroluminescence spectra showed that the dominant white peak for the WOLEDs fabricated with host red-luminescence Alq₃ and DPVBi layers did not change regardless of variations in the current. The Commission Inernationale de l'Eclairage (CIE) chromaticity coordinates for the two WOLEDs were stable, and the WOLEDs at 40 mA/cm² with luminances of 690 and 710 cd/cm² showed an optimum white CIE chromaticity of (0.33, 0.33). While the luminance yield of the WOLED fabricated with a host red-luminescent Alq₃ emitting layer below 30 mA/cm³ was larger than that of the WOLED fabricated with a DPVBi layer, above 30 mA/cm², the luminance yield of the WOLED fabricated with the DPVBi layer was higher than that of the WOLED with the Alq₃ layer and became more stable with increasing current density. These results indicate that WOLEDs fabricated with a host red-luminescence DPVBi layer without any quenching behavior hold promise for potential applications in backlight sources in full-color displays.