Effect of hot deformation on texture and magnetic properties of Sm-Co and Pr-Co alloys

Nanocrystalline PrCo₅, SmCo₅ and Sm₂(Co,Fe,Mn)₁₇ alloys were subjected to a high-degree plastic deformation at 950 °C with the height reduction ranging from 70% to 95%. With increasing degree of deformation, the PrCo₅ and SmCo₅ magnets showed improvement of the deformation-induced 0 0 1] texture. The PrCo₅ alloys, known to develop a superior texture at the lower degrees of deformation, showed only modest improvement and their magnetic performance was undermined by a low coercivity. The SmCo₅ alloys had their texture markedly enhanced and, after height reduction by 94.5%, they exhibited a remanence of 8.6 kG, maximum energy product of 18 MGOe and an intrinsic coercivity of 22.8 kOe. No induced texture was found in the alloys based on the Sm₂Co₁₇ structure. The microstructures of the hot-deformed alloys were studied with a transmission electron microscopy, and possible mechanisms of the texture development in the RCo₅ alloys (R=Pr, Sm) are briefly discussed.