Experimental study on near wall transport characteristics of slug flow in a vertical pipe

In this work, the wall shear stress and the mass transfer coefficient of the gas–liquid two-phase upward slug flow in a vertical pipe are investigated experimentally, using limiting diffusion current probes and digital high-speed video system. In experiments, the instantaneous and averaged characteristics of wall shear stress and mass transfer coefficient are concerned. The experimental results are compared with the numerical results in previous paper of the authors. Both experiment and numerical simulation show that the superficial gas and liquid velocities have an obvious influence on the instantaneous characteristics of the two profiles. The mass transfer coefficient has characteristics similar to the wall shear stress. The instantaneous wall shear stress and mass transfer coefficient profiles have the periodicity of slug flow. The averaged wall shear stress and mass transfer coefficient increase with increased superficial gas velocity. However, there is inconsistency in the variation trends of the averaged wall shear stress and mass transfer coefficient with superficial liquid velocity between experimental result and numerical simulation result, which can be attributed to the difference in flow condition. Moreover, the Taylor bubble length is also another impacting factor. The experimental and numerical results all shows that the product scale can not be damaged directly by the flow movement of slug flow. In fact, the alternative forces and fluctuations with high frequency acting on the pipe wall due to slug flow is the main cause for the slug flow enhanced CO₂ corrosion process.