首页 | 本学科首页   官方微博 | 高级检索  
     检索      

重载条件下线接触弹流问题的数值分析
引用本文:侯克平,温诗铸.重载条件下线接触弹流问题的数值分析[J].清华大学学报(自然科学版),1985(3).
作者姓名:侯克平  温诗铸
作者单位:清华大学摩擦学研究中心 (侯克平),清华大学摩擦学研究中心(温诗铸)
摘    要:提出了等温线接触弹流问题的完全数值解,通过逆解迭代计算方法,获得了不同工况条件下的油膜压力分布、油膜厚度和油膜形状。在计算过程中引入变形矩阵计算弹性变形,利用变形逆阵修正压力分布,都取得了令人满意的效果。提出的计算方法适于求解在工程实践中常遇到的重载线接触问题,所得到的计算结果中最大Hertz接触应力与 润滑油的压粘系数之积为38.93。结论与Dowson等人的理论是基本—致的。

关 键 词:弹流问题  线接触  润滑  油膜厚度  数值计算

A Numerical Analysis for the EHD Problem at Heavy Loads in Line Contacts
Hou Keping,Wen Shizhu.A Numerical Analysis for the EHD Problem at Heavy Loads in Line Contacts[J].Journal of Tsinghua University(Science and Technology),1985(3).
Authors:Hou Keping  Wen Shizhu
Abstract:A numerical solution for the elastohydrodynamic line contacts problem under heavy loads is presented, and the corresponding method which makes use of the inverse iteration is also described. The method is applicable to heavily loaded line contact problems in engineering practice. The results were obtained at maximum Hertzian pressure of 1.2 GPa. Solutions are presented showing the effect of speed, load and the influence of the pressure coefficient of viscosity of the lubricant on film thickness and pressure distributions.
Keywords:EHD problem  line contact  lubricant film thickness  numerical analysis    
本文献已被 CNKI 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号