首页 | 本学科首页   官方微博 | 高级检索  
     

木质素磺酸钠改性聚砜膜的制备及其在正渗透膜中的应用
引用本文:吴青芸,潘叶寒,金伟中,徐佳敏,劳侃侃,顾林. 木质素磺酸钠改性聚砜膜的制备及其在正渗透膜中的应用[J]. 高分子学报, 2017, 0(5): 851-857. DOI: 10.11777/j.issn1000-3304.2017.16267
作者姓名:吴青芸  潘叶寒  金伟中  徐佳敏  劳侃侃  顾林
作者单位:1. 宁波大学材料科学与化学工程学院 宁波315211;2. 中国科学院宁波材料技术与工程研究所中国科学院海洋新材料与应用技术重点实验室 宁波315201
基金项目:国家自然科学基金,宁波市自然科学基金,中国科学院海洋新材料与应用技术重点实验室开放课题,宁波大学王宽诚幸福基金
摘    要:采用木质素磺酸钠作为亲水添加剂,通过浸没沉淀相转化法制备了木质素磺酸钠共混改性聚砜膜,以改善聚砜膜的亲水性,并用作正渗透膜的支撑层,以降低内浓差极化效应.利用扫描电子显微镜、衰减全反射傅里叶变换红外光谱仪、水接触角仪等研究了不同木质素磺酸钠添加量对聚砜膜的结构和表面性质的影响.结果表明,添加木质素磺酸钠后,聚砜膜的指状孔变得规整且狭长.水接触角实验证实添加木质素磺酸钠能改善聚砜膜的亲水性,当木质素磺酸钠含量为0.4 wt%时,聚砜膜的表面水接触角可降低至65°.正/反渗透测试装置分别用于表征正渗透膜的传质性质和结构参数.结果表明,以0.4 wt%木质素磺酸钠改性聚砜膜为支撑层的正渗透膜的水渗透性能(A=3.12×10~(-5) LMH×Pa~(-1))优于纯聚砜基底正渗透膜(0.76×10~(-5)LMH×Pa~(-1)),而且前者的结构参数(S=2010mm)远小于后者(3450mm),说明木质素磺酸钠改性聚砜膜有效弱化了正渗透膜的内浓差极化效应.

关 键 词:木质素  聚砜  亲水改性  正渗透膜  内浓差极化

Preparation of Sodium Lignin Sulfonate Modified Polysulfone Membranes and Their Use as Supports for Forward Osmosis Membranes
Qing-yun Wu,Ye-han Pan,Wei-zhong Jin,Jia-min Xu,Kan-kan Lao,Lin Gu. Preparation of Sodium Lignin Sulfonate Modified Polysulfone Membranes and Their Use as Supports for Forward Osmosis Membranes[J]. Acta Polymerica Sinica, 2017, 0(5): 851-857. DOI: 10.11777/j.issn1000-3304.2017.16267
Authors:Qing-yun Wu  Ye-han Pan  Wei-zhong Jin  Jia-min Xu  Kan-kan Lao  Lin Gu
Abstract:Forward osmosis (FO) becomes an emerging and promising platform of membrane separation technology.Nevertheless,FO processing always suffers from poor water flux performance,resulted from internal concentration polarization (ICP).Herein,to improve the hydrophilicity of polysulfone (PSf) membranes,sodium lignin sulfonate (LS) was used as a hydrophilic additive to prepare LS/PSf blend membranes by phase inversion.The LS/PSf blend membranes can serve as the hydrophilic support layer of FO membranes in order to weaken the ICP.The effects of LS content on the structure and the properties of LS/PSf blend membranes were investigated by scanning electron microscopy (SEM),FTIR/ATR spectroscopy,and water contact angle (WCA).It was shown that the finger-like pores of LS/PSf blend membranes became long and narrow,and the WCA of the membrane was reduced to 65° with LS content of 0.4 wt%.Then,thin film composite (TFC) membranes were fabricated by interfacial polymerization on PSf membrane and LS/PSf blend membrane with LS content of 0.4 wt%,which were named TFC and TFC-LS0.4 membranes,respectively.The results from FTIR/ATR spectroscopy and SEM confirmed that polyamide (PA) films were formed with a typical "ridge-valley" surface morphology on both TFC and TFC-LS0.4 membranes.Moreover,the PA film of TFC-LS0.4 membrane was rougher and thicker than that of TFC membrane.Their FO performances were characterized by FO test,where the draw solution was 0.5,1.0,1.5 or 2.0 mol/L NaC1 solution,and the feed solution was DI water.The water flux and reverse salt flux increased with the concentration of draw solution both for TFC and TFC-LS0.4 membranes.With the same draw solution,TFC-LS0.4 membrane showed a larger water flux and reverse salt flux than TFC membrane.Furthermore,reverse osmosis test was conducted to study the transport properties and structural parameters of FO membranes.It is clear that TFC-LS0.4 membrane presented higher water permeability (A =3.12 × 10-5 LMH.Pa-1) with smaller structural parameter (S =2010 μm) than TFC membrane (A =0.76 × 10-5 LMH.Pa-1,S =3450 μm).It means that the hydrophilicity of LS/PSf blend membranes facilitated the weakening of ICP effects of FO membranes.
Keywords:Lignin  Polysulfone  Hydrophilic modification  Forward osmosis membrane  Internal concentration polarization
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号