A simple autonull-type servo-controlled electronic balance for thermogravimetric applications |
| |
Authors: | S. R. Naidu R. B. Awasthi N. C. Ganguli |
| |
Affiliation: | (1) Fertilizer (Planning et Development) India Ltd., Sindri, Bihar, India |
| |
Abstract: | A simple electronic autonull-type recording balance using a helical quartz spring is described. Deviation from the null position is detected by a pair of photoemissive cells. The error signal generated across the cells as a result of weight change is processed by a servo-system which, in turn, produces an electric current in the balancing coil proportional to the force required to restore the null position. This current, recorded as the potential drop across a standard resistor, is a direct measure of the weight change.The balance has good linear response and can record weight changes up to 150 mg. The performance of the balance was tested in a thermogravimetric set-up, by studying the decomposition in air of the oxalates of copper, nickel and magnesium. The decomposition of nickel oxalate was also studied in flowing hydrogen. The weighing accuracy of the balance, compared against a Mettler model H-15 single-pan balance, was found to be within±1.5%.
Zusammenfassung Eine einfache elektronische registrierende Quartz-Spiralfeder Kompensationswaage wird beschrieben. Die Abweichung von der Nullposition wird durch zwei Photoemissionszellen angezeigt. Das infolge der Gewichtsänderung durch die Zellen erzeugte Fehlersignal wird durch ein Servosystem empfangen, das seinerseits in der Ausgleichsspirale einen elektrischen Strom erzeugt, der proportional zur für die Wiederherstellung der Null-position benötigten Kraft ist. Dieser Strom, der als Spannungsgefälle in einem Standardwiderstand registriert wird, ist eine direkte Maßzahl der Gewichtsänderung.Die Waage zeigt ein gutes lineares Verhalten und kann Gewichtsänderungen bis zu 150 mg registrieren. Die Leistung der Waage wurde in einer thermogravimetrischen Vorrichtung durch Untersuchungen der Zersetzung der Oxalate von Kupfer, Nickel und Magnesium in Luft geprüft. Die Zersetzung von Nickeloxalat wurde auch in strömendem Stickstoff untersucht. Die Meßgenauigkeit der Waage, vergleichen mit der Einschalenwaage Mettler H-15 wurde im Bereich von±1.5% gefunden.
Résumé On décrit une balance électronique enregistreuse simple du type auto-zéro, à hélice de quartz. La déviation de la position zéro est décelée par une paire de cellules photoémissives. Le signal de déséquilibre décelé par les photocellules et résultant d'un changement de poids, est reçu par un système asservi qui, à son tour, produit un courant électrique dans la bobine de la balance, proportionnel à la force nécessaire pour rétablir la position zéro. Ce courant, enregistré comme chute de potentiel dans une résistance étalon, est une mesure directe du changement de poids.La balance donne une bonne réponse linéaire et peut enregistrer des changements de poids allant jusqu'à 150 mg. Ses caractéristiques ont été examinées dans un montage thermogravimétrique, en étudiant la décomposition dans l'air des oxalates de cuivre, nickel et magnésium. La décomposition de l'oxalate de nickel a aussi été étudiée sous courant d'hydrogène. L'exactitude de la balance, comparée à celle d'un modèle Mettler monoplateau (type H-15), coïncide à±1.5%.
, . . , , -, , . , , . 150 . , . . -15 +1.5%.
The authors wish to express their thanks to Mr. S. P. Sen, Manager. Catalyst Development and Production Department of Fertilizer (Planning and Development) India Limited, for his keen interest and valuable suggestions. |
| |
Keywords: | |
本文献已被 SpringerLink 等数据库收录! |
|