首页 | 本学科首页   官方微博 | 高级检索  
     检索      


Determination of cadmium, lead, and thallium in materials of the environmental specimen bank using mass spectrometric isotope dilution analysis (MS-IDA)
Authors:E Waidmann  K Hilpert  J D Schladot and M Stoeppler
Institution:(1) Institute of Applied Physical Chemistry, Nuclear Research Center (KFA), POB 1913, D-5170 Jülich, Germany
Abstract:Summary An analytical procedure for the simultaneous determination of cadmium, lead, and thallium in the mg/kg- and mgrg/kg-range in biological materials and sewage sludge by mass spectrometric isotope dilution analysis (MS-IDA) is described.Cadmium, lead, and thallium were separated by electrolytical deposition after low temperature ashing (LTA) of the samples in oxygen plasma and dissolution of the ashes in HNO3 or HNO3/HF. Measurement of the isotopic ratio was carried out with a thermal ionization mass spectrometer using the silica gel technique. Cadmium contents ranging from 1.03 to 4.60 mg/kg with relative standard deviations from 0.3 to 1.3%, lead contents ranging from 75 mgrg/kg to 25 mg/kg with relative standard deviations from 0.6 to 3.5%, and thallium contents ranging from 2.9 to 247.7 mgrg/kg with relative standard deviations from 0.1 to 1.7% were determined in the materials of the environmental specimen bank analyzed.
Bestimmung von Cadmium, Blei und Thallium in Materialien der Umweltprobenbank mit der massenspektrometrischen Isotopenverdünnungsanalyse
Zusammenfassung Ein Analysenverfahren zur simultanen Bestimmung von Cadmium, Blei und Thallium im mg/kg- und mgrg/kg-Bereich in biologischen Materialien und Klärschlamm mit der massenspektrometrischen Isotopenverdünnungsanalyse (MS-IDA) wird beschrieben.Nach Niedertemperaturveraschung (LTA) der Proben im Sauerstoffplasma und Lösen der Aschen in HNO3 oder HNO3/HF-Gemisch werden Cadmium, Blei und Thallium durch elektrolytische Abscheidung abgetrennt. Die Isotopenverhältnismessung erfolgt mit der Silicageltechnik in einem Thermionen-Massenspektrometer. In den analysierten Probenbankmaterialien werden Cadmiumgehalte im Bereich von 1,03 bis 4,60 mg/kg mit relativen Standardabweichungen von 0,3 bis 1,3%, Bleigehalte im Bereich von 75 mgrg/kg bis 25 mg/kg mit relativen Standardabweichungen von 0,6 bis 3,5 % und Thalliumgehalte im Bereich von 2,9 bis 247,7 mgrg/kg mit relativen Standardabweichungen von 0,1 bis 1,7% bestimmt.


Dedicated to Prof. Dr. W. Fresenius on the occasion of his 70th birthday
Keywords:
本文献已被 SpringerLink 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号