Effect of heptamethyldisilazane on the electrochemical performance of LiMn2O4/Li

The effect of heptamethyldisilazane as an electrolyte stabilizer on the cycling performance of a LiMn₂O₄/Li cell at different rates at 30 °C and the storage performance at 60 °C is investigated systematically based on conductivity test, linear sweep voltage, electrochemical impedance spectroscopy, scanning electron microscopy, X-ray diffraction, and charge–discharge measurements. The results show that heptamethyldisilazane added into the LiPF₆-based electrolyte can increase the stability of the original electrolyte; coulomb efficiency, the initial discharge capacity, and cycling performance at different rates in a sense, meanwhile, improve the storage performance at elevated temperature, although the C-rate performance of the cell is a little worse than that without heptamethyldisilazane in the electrolyte. When the LiMn₂O₄/Li cell with heptamethyldisilazane in the LiPF₆-based electrolyte stored at 60 °C for a week cycles 300 times, the capacity retention is up to 91.18 %, which is much higher than that (87.18 %) without the additive in the electrolyte. This is mainly due to the lower solid electrolyte interface resistance (R _f) in the cell, followed by the better morphology and structure of the cathode after storage at 60 °C for a week compared with the LiMn₂O₄/Li cell without heptamethyldisilazane.