Fabrication of uranium alloy fuel slug for sodium-cooled fast reactor by injection casting |
| |
Authors: | Jong Hwan Kim Hoon Song Ki Hwan Kim Chan Bock Lee |
| |
Institution: | 1. Next Generation Fuel Division, Korea Atomic Energy Research Institute, Daejeon, 305-353, Republic of Korea
|
| |
Abstract: | Metal fuel slugs of U–Zr alloys for a sodium-cooled fast reactor (SFR) have been fabricated using an injection casting method. However, casting alloys containing volatile radioactive constituents such as Am can cause problems in a conventional injection casting method. Therefore, in this study, several injection-casting methods were applied to evaluate the volatility of the metal-fuel elements and control the transport of volatile elements. Mn was selected as a volatile surrogate alloy since it possesses a total vapor pressure equivalent to that of minor actinide-bearing fuels for SFRs. U–10 wt% Zr and U–10 wt% Zr–5 wt% Mn metal fuels were prepared, and the casting processes were evaluated. The casting soundness of the fuel slugs was characterized by gamma-ray radiography and immersion density measurements. Inductively coupled plasma atomic emission spectroscopy was used to determine the chemical composition of fuel slugs. Fuel losses after casting were also evaluated according to the casting conditions. |
| |
Keywords: | |
本文献已被 SpringerLink 等数据库收录! |
|