Qualification of plastic encapsulated microcircuits (PEM) for avionicsBased on ``Plastic Encapsulated Microcircuits (PEM) Qualification Testing', by J. A. Scalise, which appeared in the Proceedings of the 46th Electronic Components and Technology Conference, Orlando, FL, U.S.A., 28–31 May 1996, pp. 392–397. © 1996 IEEE.

Microcircuit package qualification testing is used to establish the reliability of integrated circuit processes and devices as they relate to part packaging. This paper presents the results of package qualification tests conducted on plastic encapsulated microcircuits (PEMs) and plastic discrete devices (diodes, transistors) used in avionics applications. Highly accelerated stress test (HAST) and temperature cycle (TC) test results, including part failure mechanisms and associated failure rates, are provided. A variety of plastic package styles and integrated circuit functions have been tested. Examples of package styles tested include small outline (SO), plastic leaded chip carrier (PLCC), thin small outline package (TSOP), plastic quad flat package (PQFP) and plastic dual-in-line (PDIP).Manufacturers' devices have been evaluated and various plastic compounds have been compared to determine which provide optimum reliability. The testing showed that package qualification performance of PEMs is affected by type of compound, passivation (including die coat) and die size. HAST failures are caused by moisture penetration of the package while temperature cycle failures result from coefficient of thermal expansion (CTE) mismatch effects.