Performance of an oscillating subsoiler in breaking a hardpan

A single shank tractor mounted oscillating subsoiler was developed to break hardpan, common in sugarcane (Saccharum officinarum) farms especially after harvest when heavy trucks transport the cut canes from the field to the sugar factory. Field experiments were conducted to determine the optimum combination of performance parameters of the subsoiler. Field tests were conducted at frequencies of oscillation of 3.7, 5.67, 7.85, 9.48 and 11.45 Hz; amplitudes of 18, 21, 23.5, 34 and 36.5 mm; and forward speeds of 1.85, 2.20 and 3.42 km h⁻¹ at moisture contents close to the lower plastic limit of the clay soil. A reduction in draft but an increase in total power requirement was found for oscillating compared to non-oscillating subsoiler. The draft and power ratios were significantly affected by the forward speed, frequency and amplitude. Their combined interaction, expressed in terms of the velocity ratio (the ratio of peak tool velocity to forward speed), however, had the strongest influence. At the same velocity ratio, the draft reduction and power increase were less at higher amplitude of oscillation. For the field conditions tested, the optimum operation for least energy expenditure was obtained at an amplitude of 36.5 mm, frequency of 9.48 Hz and speed of 2.20 km h⁻¹ with a draft ratio of 0.33 and power ratio of only 1.24. It could be concluded that the oscillating subsoiler reduces draft for breaking hardpan, reduces soil compaction and promotes the use of lighter tractors by utilizing tractor power-take-off (p.t.o.) power to achieve higher efficiency of power transmission. ©