Effective elastic moduli of composites reinforced by particle or fiber with an inhomogeneous interphase

The solution of the strain energy change of an infinite matrix due to the presence of one spherical particle or cylindrical fiber surrounded by an inhomogeneous interphase is the basis of solving effective elastic moduli of corresponding composites based on various micromechanics models. In order to find out the strain energy change, the composite sphere or cylinder, i.e., the spherical particle or cylindrical fiber together with its interphase, is replaced by an effective homogeneous particle or fiber. Independent governing differential equations for each modulus of the effective particle or fiber are derived by extending the replacement method [J. Mech. Phys. Solids 12 (1964) 199]. As far as the strain energy changes of the infinite matrix subjected to various far-field stress systems are concerned, the present model is simple. Meanwhile, FEM analysis is carried out for a verification, which shows that the model can lead to rather accurate results for most practical interphases. Besides, to check the validity of the model further when the interactions among composite cylinders exist, the two problems of an infinite matrix containing two composite cylinders and the effective moduli of composites with the equilateral triangular distribution of composite cylinders are analyzed using FEM. The FEM results show that the model is still rather accurate, especially for the case of interphase properties varying between those of fiber and matrix. Therefore, composite spheres or cylinders are assumed as the effective homogeneous particles or fibers and simple expressions of the effective moduli of composites containing the composite spheres or cylinders are obtained. Furthermore, the present model is compared with some existing models that are based on very complicated derivations.