首页 | 本学科首页   官方微博 | 高级检索  
     检索      


Development characteristics of drag-reducing surfactant solution flow in a duct
Authors:Email author" target="_blank">Hiroshi?SuzukiEmail author  Gerald?G?Fuller  Tomoe?Nakayama  Hiromoto?Usui
Institution:(1) Graduate School of Science and Technology, Kobe University, 1-1 Rokkodai-cho, Nada-ku, Kobe 657–8501, Japan;(2) Department of Chemical Engineering, Stanford University, 381 North-South Mall, Stanford, CA 94305, USA;(3) Department of Chemical Engineering and Science, Kobe University, 1-1 Rokkodai-cho, Nada-ku, Kobe 657-8501, Japan
Abstract:Development characteristics of dilute cationic surfactant solution flow have been studied through the measurements of the time characteristics of surfactant solution by birefringence experiments and of the streamwise mean velocity profiles of surfactant solution duct flow by a laser Doppler velocimetry system. For both experiments, the concentration of cationic surfactant (oleylbishydroxymethylethylammonium chloride: Ethoquad O/12) was kept constant at 1000 ppm and the molar ratio of the counter ion of sodium salicylate to the surfactants was at 1.5. From the birefringence experiments, dilute surfactant solution shows very long retardation time corresponding to micellar shear induced structure formation. This causes very slow flow development of surfactant solution in a duct. Even at the end of the test section with the distance of 112 times of hydraulic diameter form the inlet, the flow is not fully developed but still has the developing boundary layer characteristics on the duct wall. From the time characteristics and the boundary layer development, it is concluded that the entry length of 1000 to 2000 times hydraulic diameter is required for fully developed surfactant solution flow.List of abbreviations and symbols A1, A2 Coefficients for time constant fitting -] - B Breadth of the test duct m] - C1, C2 Coefficients for time constant fitting -] - D Pipe diameter m] - DH Hydraulic diameter m] - g Impulse response function Pa] - H Width of the test duct m] - n Index of Bird-Carreau model -] - Re Reynolds number (=UmDH/ngr) - ReD Pipe Reynolds number (=UmD/ngr) - Rex Streamwise distance Reynolds number (=U0x/ngr) - T Absolute temperature K] - t Time s] - ta Retardation time s] - tb Build-up time s] - tx Relaxation time s] - tx1, tx2 Relaxation time for double time constant fitting s] - tprime Time constant in Bird-Carreau model s] - U Time mean velocity m/s] - Um Bulk mean velocity m/s] - Umax Maximum velocity in a pipe m/s] - U0 Main flow velocity m/s] - utau Friction velocity m/s] - x, y Coordinates m] - $$ \ifmmode\expandafter\dot\else\expandafter\.\fi{\gamma } $$ Shear rate s–1] - $$ \ifmmode\expandafter\dot\else\expandafter\.\fi{\gamma }m $$ Mean shear rate s–1] - Deltanprime Birefringence -] - delta 99% boundary layer thickness m] - eegr Solution viscosity Pa·s] - eegrP, eegrS Surfactant and solvent viscosity Pa·s] - eegr0, eegrinfin Zero and infinite viscosity of Bird-Carreau model Pa·s] - lambda Characteristic time in Maxwell model s] - ngr Water kinematic viscosity m2/s] - rgr Density kg/m3] - sgr Solution shear stress Pa] - sgrP, sgrS Surfactant and solvent shear stress Pa] - tau Time in convolution s]
Keywords:Surfactant solution  Drag reduction  Retardation time  Flow development  Micellar shear induced structure
本文献已被 SpringerLink 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号