首页 | 本学科首页   官方微博 | 高级检索  
     检索      

扩展互作用谐振腔的模拟分析
引用本文:吴振华,张开春,刘盛纲.扩展互作用谐振腔的模拟分析[J].强激光与粒子束,2007,19(3):483-486.
作者姓名:吴振华  张开春  刘盛纲
作者单位:电子科技大学 物理电子学院 太赫兹研究中心, 成都 610054
基金项目:国家自然科学基金;高等学校博士学科点专项科研项目
摘    要: 分析了扩展互作用谐振腔的工作原理、特点以及工作过程,并利用PIC粒子模拟程序对其进行了数值模拟,分析了阴极电压、电子注半径、谐振腔个数以及谐振腔周期长度对输出功率、频率及转换效率的影响。结果表明:当阴极电压为28.5~30.0 kV时,谐振腔能正常工作;当电子注半径为1.4 mm,谐振腔个数为4,阴极电压为29 kV时输出功率和转换效率最大,输出功率为128 kW,频率12.9 GHz,转换效率达37.93%;输出频率随谐振腔周期长度的变小而增大。

关 键 词:扩展互作用谐振腔  THz波段  同步  电子束群聚
文章编号:1001-4322(2007)03-0483-04
收稿时间:2006/8/9
修稿时间:2006-08-09

Simulation of extended interaction oscillator
WU Zhen-hua,ZHANG Kai-chun,LIU Sheng-gang.Simulation of extended interaction oscillator[J].High Power Laser and Particle Beams,2007,19(3):483-486.
Authors:WU Zhen-hua  ZHANG Kai-chun  LIU Sheng-gang
Institution:School of Physical Electronics, University of Electronic Science and Technology of China, Chengdu 610054, China
Abstract:The basic theories, the characteristics and the woking process of the extended interaction oscillator(EIO) were introduced. A type of EIO was simulated using PIC. The effect of the cathode voltage, the radius of the electron beam, the number and the period length of the resonant cavity on the output power, frequency and conversion efficiency were analyzed. The simulation results shown that when the working voltage is 28.5~30 kV, the resonant cavity starts to oscillate. When the input cathode voltage is 29 kV, the current is 10 A, and when the radius of electronic beam is 1.4 mm and the number of period is 4, the output power is 128 kW, the frequency is 12.9 GHz, and the efficiency is up to 37.93%.
Keywords:Extended interaction oscillator  THz band  Synchronization  Beam bunching
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《强激光与粒子束》浏览原始摘要信息
点击此处可从《强激光与粒子束》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号