A novel method for determining the viscosity of polymer solution

The relative viscosity η_r and, thus, the reduced viscosity η_sp/C of polymer solution could be obtained by recording the flow times of the polymer solution and the pure solvent in a capillary viscometer. Our experimental results indicated that the measurement of the flow time of the pure solvent was unnecessary. In particular, if the recorded flow time of the pure solvent was used to determine the viscosity of polymer solution, the reduced viscosity η_sp/C exhibited either a drastic increase or a significant decrease in an extremely dilute solution, depending upon the properties of the polymer solution investigated. In this research work, a new method for determining the viscosity of polymer solutions is reported. In the proposed method, the flow time of polymer solution at zero concentration, t₀^*, instead of the measured flow time of the pure solvent, was used to determine the viscosity of polymer solution. The reduced viscosity η_sp/C determined by the new method is proportional to concentration C even in an extremely dilute solution. The relative viscosity η_r vs. C plot also indicated clearly that t₀^*, instead of the measured flow time of the pure solvent, should be used for determining the viscosity of polymer solution. At low concentrations, the flow time of the polymer solution was proportional to C. As a result, t₀^* could be determined by extrapolating the flow time of the polymer solution to C=0.