首页 | 本学科首页   官方微博 | 高级检索  
     检索      

齿轮箱动态响应及辐射噪声数值仿真
引用本文:林腾蛟,廖勇军,李润方,刘文.齿轮箱动态响应及辐射噪声数值仿真[J].重庆大学学报(自然科学版),2009,32(8):892-896.
作者姓名:林腾蛟  廖勇军  李润方  刘文
作者单位:重庆大学机械传动国家重点实验室;
基金项目:国家科技支撑计划资助项目(2006BAF01B01-03);;重庆市重大科技专项项目(CSTC,2007AB3030)
摘    要:建立了齿轮箱传动系统及结构系统的动力有限元分析模型,综合考虑轮齿刚度激励、误差激励和啮合冲击激励等内部动态激励的影响,应用ANSYS软件对齿轮箱的固有模态和内部激励下的动态响应进行有限元数值仿真。以动态响应结果作为边界激励条件,建立了齿轮箱箱体的声学边界元分析模型,利用SYSNOISE软件中的直接边界元法求解箱体表面声压及场点辐射噪声,并对齿轮箱进行空气噪声测试。比较辐射噪声的测试结果与数值仿真结果,两者吻合良好。

关 键 词:齿轮箱  动态响应  辐射噪声  有限元法  边界元法  

Numerical simulation of dynamic response and radiation noise of gearbox
LIN Teng jiao,LIAO Yong jun,LI Run fang and LIU Wen.Numerical simulation of dynamic response and radiation noise of gearbox[J].Journal of Chongqing University(Natural Science Edition),2009,32(8):892-896.
Authors:LIN Teng jiao  LIAO Yong jun  LI Run fang and LIU Wen
Institution:State Key Laboratory of Mechanical Transmission;Chongqing University;Chongqing 400030;P.R.China
Abstract:Considering the internal dynamic excitation produced by stiffness excitation,error excitation and mesh impact excitation,a dynamic finite element model of transmission system and structure system of gearbox is established.The normal mode and the dynamic responses of gearbox under the internal dynamic excitation are calculated by using the numerical simulation software ANSYS.Based on the result of dynamic responses,the boundary excitation condition is determined,and then the acoustic boundary element model i...
Keywords:gearbox  dynamic response  radiation noise  finite element method  boundary element method  
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《重庆大学学报(自然科学版)》浏览原始摘要信息
点击此处可从《重庆大学学报(自然科学版)》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号