| 流动注射-固相萃取-分光光度法检测半导体工业用水中痕量硅 |
| |
| 引用本文： | 彭园珍,张敏,马剑,袁东星.流动注射-固相萃取-分光光度法检测半导体工业用水中痕量硅[J].分析化学,2009,37(9). |
| |
| 作者姓名： | 彭园珍 张敏 马剑 袁东星 |
| |
| 作者单位： | 厦门大学近海海洋环境科学国家重点实验室,环境科学研究中心,厦门,361005 |
| |
| 基金项目： | 厦门大学2007年度"凌峰计划"资助项目 |
| |
| 摘 要： | 硅酸盐在酸性介质中与钼酸铵反应生成硅钼黄,硅钼黄还原为硅钼蓝后,可被HLB小柱定量萃取.在此基础上,建立了流动注射-固相萃取-分光光度(FI-SPE-Vis)测定水中痕量硅酸盐的新方法.反应生成的硅钼蓝经HLB小柱萃取后,用水清洗去除杂质,NaOH溶液洗脱,分光光度法检测.实验对各参数进行了优化,优化后的参数为:洗脱剂浓度0.01 mol/L;试样上柱流速28.0 mL/min;洗脱流速3.5 mL/min;反应温度45 ℃;硅钼黄与硅钼蓝反应时间均为5 min;钼酸铵混合溶液、草酸溶液、抗坏血酸溶液的用量分别为3.5,3.5和1.75 mL.本方法具有良好的重现性和灵敏度,测定含硅9.33 μg/L的硅酸盐水样7次,RSD值为1.8%;选取不同的试样富集时间,可将定量分析的线性范围扩展为0.47～117 μg/L;检出限0.18 μg/L;回收率为96.8%～105%.可满足特殊工业用水中痕量硅检测的需要.
|
| 关 键 词： | 流动注射分析 固相萃取 痕量硅 硅钼蓝 |
Determination of Trace Silicate in Water for Semiconductor Industry by Flow Injection Automatic Analysis |
| |
| PENG Yuan-Zhen,ZHANG Min,MA Jian,YUAN Dong-Xing.Determination of Trace Silicate in Water for Semiconductor Industry by Flow Injection Automatic Analysis[J].Chinese Journal of Analytical Chemistry,2009,37(9). |
| |
| Authors: | PENG Yuan-Zhen ZHANG Min MA Jian YUAN Dong-Xing |
| |
| Institution: | PENG Yuan-Zhen,ZHANG Min,MA Jian,YUAN Dong-Xing(State Key Laboratory of Marine Environmental Science,Environmental Science Research Center Xiamen University,Xiamen 361005) |
| |
| Abstract: | The silicomolybdenum can be extracted by solid phase extraction technique on HLB column.Combining with sequential-injection analysis technique,a novel method for the determination of trace silicate in freshwater has been established.The silicomolybdenum blue was enriched by HLB column,and pure water was used to clean the column,then the silicomolybdenum blue was eluted by NaOH solution and detected by spectrophotometer.The optimized experimental parameters were as follows:the concentration of the eluent was... |
| |
| Keywords: | Flow injection analysis solid phase extraction silicate silicomolybdenum blue |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
