Enhancing Photoactivity of TiO2(B)/Anatase Core–Shell Nanofibers by Selectively Doping Cerium Ions into the TiO2(B) Core

Cerium ions (Ce³⁺⁾ can be selectively doped into the TiO₂(B) core of TiO₂(B)/anatase core–shell nanofibers by means of a simple one‐pot hydrothermal treatment of a starting material of hydrogen trititanate (H₂Ti₃O₇) nanofibers. These Ce³⁺ ions (≈0.202 nm) are located on the (110) lattice planes of the TiO₂(B) core in tunnels (width≈0.297 nm). The introduction of Ce³⁺ ions reduces the defects of the TiO₂(B) core by inhibiting the faster growth of (110) lattice planes. More importantly, the redox potential of the Ce³⁺/Ce⁴⁺ couple (E°(Ce³⁺/Ce⁴⁺)=1.715 V versus the normal hydrogen electrode) is more negative than the valence band of TiO₂(B). Therefore, once the Ce³⁺‐doped nanofibers are irradiated by UV light, the doped Ce³⁺ ions—in close vicinity to the interface between the TiO₂(B) core and anatase nanoshell—can efficiently trap the photogenerated holes. This facilitates the migration of holes from the anatase shell and leaves more photogenerated electrons in the anatase nanoshell, which results in a highly efficient separation of photogenerated charges in the anatase nanoshell. Hence, this enhanced charge‐separation mechanism accelerates dye degradation and alcohol oxidation processes. The one‐pot treatment doping strategy is also used to selectively dope other metal ions with variable oxidation states such as Co^2+/3+ and Cu^+/2+ ions. The doping substantially improves the photocatalytic activity of the mixed‐phase nanofibers. In contrast, the doping of ions with an invariable oxidation state, such as Zn²⁺, Ca²⁺, or Mg²⁺, does not enhance the photoactivity of the mixed‐phase nanofibers as the ions could not trap the photogenerated holes.