Thermorheological properties of LLDPE/LDPE blends: Effects of production technology of LLDPE

The thermorheological behavior of a number of LLDPE/LDPE blends was studied with emphasis on the effects of the production technology of the linear low‐density polyethylene (LLDPE) and the effects of long chain branching (LCB). Two Ziegler‐Natta LLDPE's (LL3001.32 and Dowlex2045G) and two metallocene LLDPEs (AffinityPL1840 and Exact 3128) were blended with a single low‐density polyethylene (LDPE), with all LLDPEs having distinctly different molecular weight. The weight fractions of the LDPEs used in the blends were 1, 5, 10, 20, 50, and 75%. DSC analysis has shown that the blends with metallocence LLDPEs are miscible in the crystal state, whereas for the Ziegler‐Natta, apart from the two distinct peaks of the individual components, a third peak appears which indicates the existence of a third phase that is created from the cocrystallization of components from the two blended polymers. The linear viscoelastic characterization was performed and mastercurves at 150 °C were constructed for all blends to check miscibility using the time temperature superposition principle. In addition, Van Gurp Palmen and zero‐shear viscosity versus composition were constructed to check the thermorheological behavior of all blends. In general, good agreement is found among these various methods. It was concluded that metallocene LLDPEs are more compatible with LDPE at all LDPE compositions when compared with their Ziegler‐Natta counterparts. Finally, the extensional properties of all blends were studied to examine the effects of different levels of LCB on their extensional rheological properties. It was concluded that extensional rheology is a sensitive tool capable of detecting subtle changes in the polyethylene macrostructure, that is, low levels of LCB. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 1669–1683, 2008