Foaming in aqueous solutions of zwitterionic surfactant: Effects of oil and salts |
| |
Authors: | Shailesh R. Varade |
| |
Affiliation: | Department of Chemical Engineering, Indian Institute of Technology Guwahati, Guwahati, Assam, India |
| |
Abstract: | This paper reports a study on the stability of foams generated from the aqueous solutions of the zwitterionic surfactant, N-Dodecyl-N,N-dimethyl-3-ammonio-1-propanesulfonate, in presence of NaCl, CaCl2 and AlCl3. The effect of oil (i.e. n-hexane) on foam was also studied. The surface and interfacial tensions were measured. These tensions and the CMC decreased upon salt addition, signifying an increased adsorption of the surfactant molecules at the interface. The quantity of salt required for reducing the surface tension and CMC was in the sequence: NaCl > CaCl2 > AlCl3. The salts had a pronounced effect on the foaming characteristics, i.e. they reduced the initial foam volume. The effectiveness of salts in reducing the foam stability followed the sequence: AlCl3 > CaCl2 > NaCl. However, the foam collapse rate was reduced in the presence of salt. The presence of oil decreased the foam volume and reduced its stability. The entering, bridging, and spreading coefficients were calculated, which explained the stability of foams in presence of oil. |
| |
Keywords: | Adsorption foam stability oil effect salt effect zwitterionic surfactant |
|
|