| Abstract: | The purpose of the presented research was the investigation of the stability and differences of degradation of polyolefines during various recycling processes. In modeling the recycling process during melting, extrusion with a one-screw extruder was used. Recycling through selective dissolution was modulated by two different solvents (xylene and a definite mixture of n-alkanes). Materials used for the investigations were polypropylene (PP), low-density polyethylene (LDPE) and high-density polyethylene (HDPE) (Ziegeler-Natta technology with vanadium catalyst). Changes in the chemical structure of polymers were measured with infrared spectroscopy and differential scanning calorimetry (DSC). Flow properties were characterized by melt flow index, and mechanical characteristics by tension. Experimental results show that for PP and HDPE, utilizing all investigated recycling technologies, chain scission prevailed over branching. For the LDPE chain branching was obtained. By the same token, differences in crystallinity (and as follows, in molecular mass) between the same materials, recycled by extrusion and selective dissolution, was obtained. During selective dissolution changes of properties and morphology in dependence of the solvent used were observed with the trend being that the amount of the admixture of n-alkane used in this investigation was more considerable with regard to the amount of material destruction as compared to xylene. Any reduction of the mechanical properties of any of the investigated polymers as a result of the various methods used was comparable. |
