首页 | 本学科首页   官方微博 | 高级检索  
     检索      


Ion-chromatographic determination of fluorine in texas lignite
Authors:D Chakraborti  D C J Hillmann  R A Zingaro and K J Irgolic
Institution:(1) Department of Chemistry, Texas A & M University, College Station, 77843-1243 Texas, USA;(2) Texas A & M University Coal and Lignite Research Laboratory, Texas A & M University, College Station, 77843-1243 Texas, USA;(3) Jadavpur University, Calcutta, India
Abstract:Summary Samples of approximately 1.0 g were taken from three Texas lignite cores and mineralized in oxygen bombs. The residue was dissolved in distilled water to a total volume of 50 ml. The resulting solutions were analyzed for fluoride by ion chromatography and with a fluoride-sensitive electrode. The results obtained with these two methods were in good agreement. The pH of solutions prepared from mineralized lignite samples must be adjusted to fall into the range 4 to 12 before fluoride is determined by ion chromatography. The calibration curve is linear to 10 mg/l F (in solution). Twenty mgrg/l of F (in solution) corresponding to 1 mg/kg of dry lignite can still be determined. Ion chromatography has higher sensitivity for fluoride than fluoride-sensitive electrodes and provides at the same time information about other anionic species. The fluorine concentrations in the three cores varied from 10 to 140 mg/kg (dry lignite). Layers of clay interspersed between the lignite seams had higher fluorine concentrations than the lignite.
Ionen-chromatographische Bestimmung von Fluor in Braunkohle aus Texas
Zusammenfassung Braunkohlenproben von etwa 1 g wurden in der Sauerstoffbombe mineralisiert, der Rückstand in Wasser gelöst und die Lösung mit Hilfe der Ionen-Chromatographie und mit einer fluoridsensitiven Elektrode auf Fluorid untersucht. Die mit beiden Methoden erhaltenen Ergebnisse stimmten gut überein. Vor der Ionen-Chromatographie müssen die Lösungen der mineralisierten Proben auf pH 4–12 eingestellt werden. Die Eichkurve verläuft bis 10 mg/l F linear. Noch 20 mgrg/l F (in Lösung), entsprechend 1 mg/kg trockener Braunkohle, können bestimmt werden. Die Ionen-Chromatographie weist eine höhere Empfindlichkeit auf als fluorid-sensitive Elektroden und bietet darüber hinaus Information über andere Anionen. Die untersuchten Fluoridkonzentrationen lagen zwischen 10 und 140 mg/kg (trockene Braunkohle). Zwischengelagerte Lehmschichten wiesen höhere Fluorgehalte auf.
Keywords:
本文献已被 SpringerLink 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号