有机电致蓝光器件激发YAG∶Ce荧光粉光谱特性研究

模拟无机大功率白光LED由蓝光芯片激发荧光粉形成白光的发光方式,基于有机电致蓝光器件激发黄色的YAG∶Ce荧光粉来实现全色器件.采用真空蒸镀法,制备了ITO/2T-NATA(30 nm)/AND ∶ TB-Pe(50 Wt％,40 nm)/Alq3 (100 nm)/LiF(1 nm)/Al(100 nm)的蓝光器件,...

The spectrogram characteristics of organic blue-emissive light-emitting excitated YAG : Ce phosphor

It is demonstrated that the panchromatic luminescence devices with organic blue-emissive light-emitting was fabricated. This technique used down conversion, which was already popular in inorganic power LEDs to obtain white light emission. A blue OLED device with a configuration of ITO/2T-NATA (30 nm)/AND : TBPe (50 Wt%, 40 nm)/Alq3 (100 nm)/LiF(1 nm)/Al(100 nm) was prepared via vacuum deposition process, and then coated with YAG : Ce phosphor layers of different thicknesses to obtain a controllable and uniform shape while the CIE coordinates were fine tuned. This development not only decreased steps of technics and degree of difficulty, but also applied the mature technology of phosphor. The results showed that steady spectrogram was obtained in the devices with phosphor, with a best performance of a maximum luminance of 13 840 cd x m(-2) which was about 2 times of that of the devices without phosphor; a maximum current efficiency of 17.3 cd x A(-1) was increased more two times more than the devices without phosphor. The emission spectrum could be adjusted by varying the concentration and thickness of the phosphor layers. Absoulte spectrogram of devices was in direct proportion with different driving current corresponding.