首页 | 本学科首页   官方微博 | 高级检索  
     检索      

基于弹性力学的应力加工方法有限元分析
引用本文:孙天祥,杨力,吴永前,雷柏平,万勇建.基于弹性力学的应力加工方法有限元分析[J].强激光与粒子束,2010,22(2).
作者姓名:孙天祥  杨力  吴永前  雷柏平  万勇建
作者单位:1. 中国科学院 光电技术研究所, 成都 610209; 2. 中国科学院 研究生院, 北京100039
基金项目:国家自然科学基金项目 
摘    要:基于弹性力学理论,对应力加工方法的原理、算法及玻璃薄板对复杂面型的模拟进行了研究。在球面镜周边分布力和力矩的状态下对球面变形为轴对称非球面进行了分析,以抛物面镜为例,采用有限元法对玻璃薄板周边施加均布弯矩后产生的变形量和最大应力进行了模拟、分析和仿真计算,得出的仿真结果与球面和抛物面之间的理想变形量进行比较,验证了基于弹性力学的应力加工方法加工旋转对称非球面理论的正确性。

关 键 词:光学加工  应力加工方法  弹性力学  抛物面  有限元法
收稿时间:1900-01-01;

Finite element analysis of stressed mirror polishing based on elasticity mechanics
SunTianxiang,YangLi,WuYongqian,LeiBaiping,WanYongjian.Finite element analysis of stressed mirror polishing based on elasticity mechanics[J].High Power Laser and Particle Beams,2010,22(2).
Authors:SunTianxiang    YangLi  WuYongqian  LeiBaiping  WanYongjian
Institution:1. Institute of Optics and Electronics, Chinese Academy of Sciences, Chengdu 610209, China;2. Graduate University of Chinese Academy of Sciences, Beijing 100039, China
Abstract:Based on the elasticity mechanics theory,the principle and calculation method of stressed mirror polishing(SMP) are studied,as well as the simulation of complex surfaces with elastic optical thin plates.The change of sphere into axisymmetric aspheric surface is analyzed with forces applied around the spherical mirror.Considering the fabrication of a parabolic mirror,the deformation and the maximal stress of thin mirror plate have been simulated with bending moments applied around.The simulated deformation b...
Keywords:optical fabrication  stressed mirror polishing  elasticity mechanics  paraboloid  finite element method
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《强激光与粒子束》浏览原始摘要信息
点击此处可从《强激光与粒子束》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号