| Abstract: | A modified sulfur chemiluniinescence detector (SCO) has been interfaced to a HPLC-HRGC hyphenated system. This combination enables the full characterization and quantitation of the sulfur containing compounds in (heavy) middle distillate oil fractions (boiling range 150–450°C). The system is suited to identify and determine the various groups of orgaiio-sulfur structures such as: thiols + sulfides + thiophencs, benzothiophenes, dibenzothiophenes and benzo-naphthothiophenes. Within these groups a separation according to boiling point is accomplished. Therefore it allows the separation, identification and quantitation of a number of individual species, especially those which are refractory to hydrodesulfu-rization (HDS), such as 3-methyl-benzothiophene, 4-methyl-dibenzothiophene and -J,6-dimethyl-dibenzothiophene. The analysis of these groups and specific compounds is the key in understanding the kinetics of the chemistry involved in HDS. The complete instrumental set-up is fully automated by computer control. To suppress possible interferences and quenching of the sulfur response of the SCL from (large amounts of) hydrocarbons, it is aligned above the adapted flame ionization detector (FID) of the GC. This renders a sensitivity of the SCO for sulfur of 2 pg. s?1, which corresponds to a minimum detectable level for individual sulfur species in oil fractions for the complete system of 1 ppm (mg. kg?1) sulfur. Its linear dynamic range exceeds 105, which means that also untreated, high sulfur containing feedstocks can be analyzed directly. The selectivity of sulfur to carbon of the modified SCO exceeds 106. A number of HDS feedstocks and desulfurized products of different desulfurization levels have been analyzed with the system. From the analysis results the behavior of the refractory compounds in HDS can now be followed closely. |
