| Abstract: | Knowledge of the acoustic cavitation cloud would be useful for improving ultrasound reactor design. Among the characterisation techniques, few are adapted to bubble investigations in an intense ultrasound field. Some problems raised by these measurements result from interactions between the acoustic pressure wave and the measuring light wave. This paper reports the implementation of the laser diffraction technique to determine the size and volume concentration of bubbles generated by a dipping horn operating at 20 kHz. Measurements were performed with a Malvern 2600 instrument. The size distribution, deduced from the diffraction pattern scattered by the bubble cloud crossed by a laser beam, is disturbed by the acoustic pressure wave involving deviation of a light beam at low diffusion angles (acousto‐optic effect). A bubble size correction procedure based on the subtraction of the light energy due to the ultrasound wave is described. The size measurements, and thus the correction procedure, were validated by a second laser technique based on a different measuring principle: phase Doppler interferometry. The measurement reliability was further confirmed by an original application of laser diffraction based on measurements performed just after sonication. These three methods lead to a mean bubble size (Sauter mean diameter) of about 10 μm at a high ultrasound power input. Concerning the void fraction, only measurements achieved after sonication and by laser diffraction predict a correct estimation of this parameter. |
