Determination of the abundance of delta15N in nitrate ion in contaminated groundwater samples using an elemental analyzer coupled to a mass spectrometer

A rapid method for measuring the delta15N of nitrate ion in water samples using an isotope ratio mass spectrometer coupled to an elemental analyzer system (EA-MS) was investigated. The water should be removed from the analytical sample before measurement with this system. We investigated the application of a super-absorbent polymer resin powder to various water samples. Each 1 mg of polymer resin powder can absorb about 50-100 mg of solution depending on the concentrations of major ions. Only samples which contain more than 100 mg l(-1) of nitrate-nitrogen are suitable to be absorbed by the polymer resin for the determination of delta15N of nitrate. Preconcentration by rotary evaporation was necessary for dilute samples but the temperature should be kept below 60 degrees C. The polymer resin (about 8 mg) containing the nitrate was directly analyzed using an EA-MS after being oven-dried at 80 degrees C. Good accuracy (precision +/- 0.3%) for delta15N measurements of nitrate-nitrogen in a sample without any isotope fractionation effects during pre-treatment was observed. Results for delta15N of nitrate in contaminated groundwater samples collected in the spring at a tea plantation area in Shizuoka, Japan, were from 9.8 to 10.6%, which were close to the delta15N abundance in organic fertilizers.