首页 | 本学科首页   官方微博 | 高级检索  
     

硼砂-对苯二甲酸电解液中AZ91D镁合金的阳极氧化处理
引用本文:刘妍,卫中领,杨富巍,张昭. 硼砂-对苯二甲酸电解液中AZ91D镁合金的阳极氧化处理[J]. 物理化学学报, 2011, 27(10): 2385-2392. DOI: 10.3866/PKU.WHXB20110931
作者姓名:刘妍  卫中领  杨富巍  张昭
作者单位:1. Department of Chemistry, Zhejiang University, Hangzhou 310027, P. R. China;2. Magnesium Technology Co., Ltd, Chinese Academy of Sciences, Jiaxing 314051, Zhejiang Province, P. R. China;3. Department of Chemistry, Tianshui Normal University, Tianshui 741000, Gansu Province, P. R. China
基金项目:国家自然科学基金,上海市重点基础研究项目,嘉兴市科技领军人才计划项目
摘    要:研究了硼砂-对苯二甲酸环保型电解液中AZ91D镁合金的阳极氧化.考察了对苯二甲酸对镁合金阳极氧化过程及其氧化膜性能的影响,并利用扫描电镜(SEM)、X射线衍射(XRD)、能量散射谱(EDS)、动电化极化和电化学交流阻抗谱(EIS)等进行了分析表征.结果表明,对苯二甲酸的浓度对阳极氧化成膜过程、氧化膜的表面形貌、厚度、相结构和耐腐蚀性能都有重要影响.在硼酸盐电解液中加入适量的对苯二甲酸后,氧化电流密度降低,过度放电现象受到了明显的抑制,所制得的阳极氧化膜的质量也有了显著改善.氧化膜表面变得光滑、致密,膜厚度略有降低.氧化膜与镁合金基底的结合更紧密,而且其耐腐蚀性能也得到了明显增强.该研究对于镁合金阳极氧化处理工艺的环保化及阳极氧化膜质量的提高都具有积极意义.

关 键 词:阳极氧化  环保型电解液  镁合金  对苯二甲酸  耐腐蚀性能  
收稿时间:2011-03-16
修稿时间:2011-07-27

Anodizing of AZ91D Magnesium Alloy in Borate-Terephthalic Acid Electrolyte
LIU Yan,WEI Zhong-Ling,YANG Fu-Wei,ZHANG Zhao. Anodizing of AZ91D Magnesium Alloy in Borate-Terephthalic Acid Electrolyte[J]. Acta Physico-Chimica Sinica, 2011, 27(10): 2385-2392. DOI: 10.3866/PKU.WHXB20110931
Authors:LIU Yan  WEI Zhong-Ling  YANG Fu-Wei  ZHANG Zhao
Affiliation:1. Department of Chemistry, Zhejiang University, Hangzhou 310027, P. R. China;2. Magnesium Technology Co., Ltd, Chinese Academy of Sciences, Jiaxing 314051, Zhejiang Province, P. R. China;3. Department of Chemistry, Tianshui Normal University, Tianshui 741000, Gansu Province, P. R. China
Abstract:Anodizing a AZ91D magnesium alloy in environmentally friendly borate-terephthalic acid (TPA)electrolyte was studied.The effect of TPA on the anodizing process and the properties of the resultant anodized film were investigated by scanning electron microscopy (SEM),X-ray diffraction (XRD),energy dispersive spectrometry (EDS),potentiodynamic polarization,and electrochemical impedance spectroscopy (EIS).The results showed that the anodizing process,the surface morphology,thickness,phase structure,and corrosion resistance of the anodized film were strongly dependent on the concentration of TPA.In the presence of adequate TPA,a moderate anodizing process was obtained.The currant density of the anodizing process was reduced and excessive sparking in the anodizing process was obviously inhibited.In the presence of TPA,the quality of the anodized film improved.The film became more compact and smooth in structure.The thickness of the film decreased slightly.The interface between the anodized film and the magnesium substrate became indistinct indicating a better adhesion between them.The corrosion resistance of the anodized film was obviously enhanced.From these highly positive results,TPA can be used as an effective additive for the anodizing treatment of magnesium alloy.The proposed anodizing process is of importance to make the existing anodizing process `greener' and to improve the quality of the anodized film.
Keywords:Anodizing  Environmentally friendly electrolyte  Magnesium alloy  Terephthalic acid  Corrosion resistance
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《物理化学学报》浏览原始摘要信息
点击此处可从《物理化学学报》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号