首页 | 本学科首页   官方微博 | 高级检索  
     

以Ca-M-Al(M=Mg,La,Ce,Y)层状双氢氧化物为前驱体的固体碱用于 酯交换合成碳酸二甲酯
引用本文:廖云辉,李枫,代鑫,赵宁,肖褔魁. 以Ca-M-Al(M=Mg,La,Ce,Y)层状双氢氧化物为前驱体的固体碱用于 酯交换合成碳酸二甲酯[J]. 催化学报, 2017, 38(11). DOI: 10.1016/S1872-2067(17)62898-5
作者姓名:廖云辉  李枫  代鑫  赵宁  肖褔魁
作者单位:1. 中国科学院山西煤炭化学研究所煤转化国家重点实验室, 山西太原030001;中国科学院大学, 北京100049;2. 中国科学院山西煤炭化学研究所煤转化国家重点实验室,山西太原,030001;3. 中国科学院山西煤炭化学研究所煤转化国家重点实验室, 山西太原030001;国家煤基合成工程技术研究中心, 山西太原030001
基金项目:山西省自然科学基金,山西省煤基重点科技攻关项目(MD2014-09
摘    要:碳酸二甲酯(DMC)是一种环境友好型绿色化学品,可作为甲基化和羰基化试剂用于取代传统剧毒的硫酸二甲酯和光气.另外,DMC具有良好的溶解性能,可用于高级溶剂;DMC分子中具有高的氧含量,可用作汽油添加剂来提高汽油的辛烷值;DMC还可用作聚碳酸酯的原料.随着人们环保意识的不断增强,DMC的生产和应用呈现出巨大的吸引力和市场潜力.DMC合成方法主要有光气法、甲醇氧化羰化法、尿素醇解法及酯交换法等.酯交换法具有反应条件温和、产率高等优点,是目前工业制备DMC的主要方法.研究发现,相对于酸性催化剂,碱性催化剂更有利于酯交换法合成DMC.金属氧化物催化剂具有活性高、热稳定性高及可连续重复回收利用等优点,因而引起了广泛关注.CaO对于酯交换合成DMC反应具有良好的催化活性,但其稳定性差.因此,通常采用复合金属氧化物来促进CaO的分散,并增加金属间相互作用以防止CaO流失.研究发现,经煅烧后的Mg-Al,Ca-Al和Ca-Mg-Al催化剂对于酯交换反应具有高的活性和稳定性.此外,通过碱性稀土金属(La,Ce和Y)的引入可以修饰催化剂上的碱性位点,从而调变催化剂的碱性.本文合成了一系列以Ca-M-Al(M=Mg,La,Ce,Y)层状双氢氧化物为前驱体的固体碱催化剂,将其用于甲醇与碳酸丙烯酯酯交换合成DMC.通过X射线衍射、热重分析、红外光谱、X射线光电子能谱、电感耦合等离子体、CO2程序升温脱附和Hammett指示剂对催化剂进行了表征.研究发现,各催化剂的活性高低依次为:Ca-Y-Al
关 键 词:Ca-M-Al层状双氢氧化物  固体碱  酯交换反应  碳酸二甲酯

Solid base catalysts derived from Ca-M-Al (M=Mg,La, Ce,Y) layered double hydroxides for dimethyl carbonate synthesis by transesterification of methanol with propylene carbonate
Yunhui Liao,Feng Li,Xin Dai,Ning Zhao,Fukui Xiao. Solid base catalysts derived from Ca-M-Al (M=Mg,La, Ce,Y) layered double hydroxides for dimethyl carbonate synthesis by transesterification of methanol with propylene carbonate[J]. Chinese Journal of Catalysis, 2017, 38(11). DOI: 10.1016/S1872-2067(17)62898-5
Authors:Yunhui Liao  Feng Li  Xin Dai  Ning Zhao  Fukui Xiao
Abstract:Composite solid base catalysts derived from Ca-M-Al (M = Mg, La, Ce, Y) layered double hydroxides (LDH) were synthesized, characterized and applied to the transesterification of methanol with pro-pylene carbonate. X-ray diffraction analyses of the catalysts show that all of the catalysts were in the form of composite oxides. Compared with the Ca-Al LDH catalyst, the specific surface areas and pore volumes of the catalysts were increased with the introduction of Mg, La or Ce. The catalytic perfor-mance of these catalysts increases in the order of Ca-Y-Al < Ca-Al < Ca-Ce-Al < Ca-La-Al < Ca-Mg-Al, which is consistent with the total surface basic amounts of these materials and the formation of especially strong basic sites following modification with Mg and La. The Ca-Mg-Al catalyst shows the highest (Ca+Mg):Al atomic ratio, indicating that it likely contains more unsaturated O2- ions, providing it with the highest concentration of very strong basic sites. The recyclability of these cat-alysts is improved following the addition of Mg, La, Ce or Y, with the Ca-Mg-Al maintaining a high level of activity after ten recycling trials. X-ray diffraction analyses of fresh and used Ca-Mg-Al demonstrate that this catalyst is exceptionally stable, which could be of value in practical applica-tions related to heterogeneous catalysis.
Keywords:Ca-M-Al layered double hydroxide  Solid base  Transesterification  Dimethyl carbonate
本文献已被 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号